Jimmy in NC
Addicted to ArboristSite
I was thinking....I do not recommend an 880 and 59" bar combo for you. Just saying....I heard Sparky mumble something about dang heavy or something. Uncle Mongo should avoid that setup too!
Sure is quiet in here....do I need to start a fight?
- Thread starter caleath
- Start date
Help Support Arborist Forum:
Made muh self stay in bed long as I could. LOL
I don't need anything that big ! LOL
Jimmy in NC
Addicted to ArboristSite
Me either!
Jimmy in NC
Addicted to ArboristSite
Did run that 550xp at the show yesterday. That is one stout little saw stock! You'd really like it...and no need to tune ever!
My radar is sayin' ol' Ron Don is getting hammered about now with pretty heavy rain!!!
Been reading about them.
I am done buying saws , unless there super cheap !
Going to clean a bunch out soon.
If its that **** that went through here , he is getting it good ! Parts of Ohio got 3" , I got 1-1/2" .
I know he was working on getting me a nice truck but that 880 was a real nice thought
I don't have any of those axes LOL
John , you postin ads up here ????
John , you postin ads up here ????
Nah , I would ask a lot more for that ! LOL
Get ole Scoot to make you a Pro sticker , be worth more money if it was a Poulan Pro LOL
Okay so is it easier to put the carb, intake etc on this one together as a unit and install? Seems like a pain otherwise.
Anyone have a Husky 40,45,49 to get a pic of how the throttle cable is attached to the throttle cam? One thing I didn't take a photo off. Grr.
Rick
On the throttle linkage the plastic end goes into the tank with it up and down,taller than wider ,etc
you can feel it when pullinf on the trigger it is workingin right spot.
then will need to pull carb off and tilt and turn it to get end of the linkage in the hole.
of you get it wrong linkage wont work with carb on.
unhook linkage and turn it around
Looks like a deal LOL
Anyone want it ???
AU_K2500
NSM
Jimmy, I believe it was a 59" bar on the 880.
Morning fellas. Big day today. Time to change the oil in the truck. Going to clean and tidy up a few other things as well.
I need to find a SS flexible line with male 1/8" NPT fittings either end. Bout 25-30" long. It would connect a fuel pressure sensor to the fuel filter housing. The cheap line I'm using now is too short and its leaking.
Morning fellas. Big day today. Time to change the oil in the truck. Going to clean and tidy up a few other things as well.
I need to find a SS flexible line with male 1/8" NPT fittings either end. Bout 25-30" long. It would connect a fuel pressure sensor to the fuel filter housing. The cheap line I'm using now is too short and its leaking.
On the throttle linkage the plastic end goes into the tank with it up and down,taller than wider ,etc
you can feel it when pullinf on the trigger it is workingin right spot.
then will need to pull carb off and tilt and turn it to get end of the linkage in the hole.
of you get it wrong linkage wont work with carb on.
unhook linkage and turn it around
Yeah, see how it goes together , just didn't know if its easier to screw the intake, carb and air filter all together, then attach throttle cable, then fuel line and then bolt down.
Maybe now that I'm not starving hungry it'll go together easier without my hands shaking. LOL
Rick
Looks like a deal LOL
Anyone want it ???
I would go for it if he took $200 off.....
I like how he would take a bp-1 as a partial trade.....
That mac is only worth 2-3x as much as he is asking for that homelite.....
