Wet saw weights

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

IchWarriorMkII

ArboristSite Guru
Joined
Sep 28, 2006
Messages
818
Reaction score
162
Location
Colorado
I brought a postal scale home, to weigh in my two saws and see what they would weigh ready to go cut some wood:

Husqvarna 353 E-Tech w/ 18" Husqvarna Bar : 14 lbs


Stihl Ms361 w/ 20" Stihl RollematicE Bar : 17 lbs


I thought the scale would offer finer measurements, but this got me well enough into the ballpark of what I was hefting around in the woods... not what the stat sheets say online.

Someone needs to weigh a 2171 so I can daydream about it more :hmm3grin2orange:


I think the stat sheets show the 361 and 353 apart by a little over 2 lbs, but Im sure the longer bar (bigger all around) and 3/8 chain increase the margin by a bit, the fuel/oil tanks should be a little bigger too...
 
I will fess up.

My Dolmar 6400 full of fuel and bar oil wearing a 20 inch bar and half wore out chain full chisel weighs in at drum roll....... 19 pounds 12 ounces. what happened to that 13.6 pounds. Oh wait, that was PHO no wet load or bar.
 
Went out and wieghed some of them this morning on a good balance scale full of gas and oil with bar and chain and a little dirt that they collect.
Stihl Ms170 10.5# 12" bar
Echo CS5000 14.7# 20"bar
Echo Cs510 15.3# 20" bar
Cub Cadet 5720 18# 20" bar
Echo Cs6700 18.1 20" bar
Stihl 044 19.4# 22" bar
Echo CS8000 21.9# 22" bar
Husky 385xp 22.2# 22" bar
Solo 690 24.1# 22" bar
Old Echo 302 12.3# 14" bar Steve
 
I gotta get me one of them wet saws you guys are talkin about.

Do they run better than regular ones?

:blob2:
 
Anyone know how much a 357XP with a 20 inch bar, full of mix and bar oil weighs?

I'll weigh mine with an 18" bar so you can compare the two...

BTW, is anyone taking notes from this thread? It would probably make a nice spreadsheet of useful, comparible info for those looking for a new saw. I think I'll weigh my 025 also for s&g's.
 
Wizz 66

Anyone know how much a wiizz 66 with 48" bar and chain weighs|? I don't have a scale that would weighit that close it would be off 3-5 pounds. Thanks if anyone could answer. POLLOCK
 
have a bathroom scale?

Anyone know how much a wiizz 66 with 48" bar and chain weighs|? I don't have a scale that would weighit that close it would be off 3-5 pounds. Thanks if anyone could answer. POLLOCK

weigh yourself, then hold the saw and weigh yourself again.. That will be close enough for us.
 
Wizz 66

thats what I was going to do but my scale is old ad being off 3-5 pounds ? I'll go get a new scale and get back to you. POLLOCK
 
My 440 weighs 19.0 pounds topped off and 20" b/c
My 460 weghs 20.0 pounds topped off and 20" b/c
MY 280 weighs 16.5 pounds topped off and 16" b/c.
:D
 
Back
Top