What wood burns hottest?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
homemade

homemade

Certified Chainsaw Tester
Joined
Nov 25, 2010
Messages
1,002
Location
Eastern WI
Ther is a ton of btu charts all over the internet. But that is total btu output usually per pound of wood over a period of time or until the wood is gone. So one pound of oak might have a bit rating of 200,000btu per pound and take 3hrs to extract that, and a red pine might only have a btu of 150,000btu per pound and take 2hours to consume it.

That being said, the same red pine will achieve a hotter stove temp, but not last as long. So when you ask what wood is hotter, it’s a open ended question. Are you asking total btu or highest output temp?
For me, I’ll use pine and soft wood all day because It seams that it all I get, and save the oak and hickory for the overnight burn.


Sent from my iPhone using Tapatalk
 
Ash_403

Ash_403

Shop smart. Shop S-Mart.
Joined
Nov 5, 2010
Messages
324
Location
S central Indiana
I still have a few chunks of Honey Locust. Cut, split, stacked under top-cover of rain for the past 6 years. This stuff is the hottest burning wood I've personally burned. With a few pieces of this stuff loaded and going, I have to watch the draft a little closer. Hellfire, would be a good description.
I guess I save it for the colder nights, since I started with a full cord, 6 years ago. Now down to about a dozen pieces. Last winter wasn't too cold in this area.

I would love to get hold of some Osage Orange. I grows in this area, but I just haven't come across any.
 
Joined
Oct 19, 2009
Messages
29,496
Location
MN
Just as a preface, BTU charts show how much energy there is within a certain volume of that species of wood. Different species will have different rates of burn (as will different trees within a species and even the location within the tree). I'm assuming the OP is looking for which ones burns hottest (temperature wise) versus which ones put out the most total output.

We do not have Osage here so I cannot comment on that. Up here Tamarack is king. It has the reputation of being able to melt stoves with thin walls if you load them up with pure tamarack.

I've used it in my sauna a bit and will say it gets you heat immediately. Won't burn as long as oak but will have the place hot much quicker.
 
Ted Jenkins
Joined
Apr 18, 2016
Messages
3,502
Location
Twin Peaks
Home has the right answer it all depends. The charts that I have relied on for ages measure by the cubic foot not by the lb. Olive is the hottest wood that I have ever worked with and the heaviest. When it is dry it comes in at 7000 to 8500 lbs per cord. Once you get it going it is similar to coal. Open up the air drafts and watch every thing turn red. Thanks
 

Latest posts

Top