looking to buy a small grinder has anyone heard anything about the Powertec 20hp Kohler hydrostatic drive grinder $6200. A big grinder is not an option $$$. Plus need one to get in tight spots in city NY or backyards. Also looked at the husqvarna grinder $3500 has anyone used one of those.
Best Small Stump grinders
- Thread starter sal b
- Start date
Help Support Arborist Forum:
hornett22
Addicted to ArboristSite
i have the husqvarna one.
i use it all the time.i love it.i did switch it over to green teeth though.don't let them sell you the deep dish teeth though.they work ok but the shallow would work better.
i use it all the time.i love it.i did switch it over to green teeth though.don't let them sell you the deep dish teeth though.they work ok but the shallow would work better.
hornett22
Addicted to ArboristSite
buy the husky one on ebay ...........
from the place in shaumburg illinois.much cheaper,fast shipping, and no sales tax.
from the place in shaumburg illinois.much cheaper,fast shipping, and no sales tax.
That is similar to the grinder I use. Definatley get the hydrostatic/ self propelled version. There are many makes of similar grinders. Rayco, Powertek, Beeline ( sunrise concepts) . I really like this style of grinder. There is a learning curve but once mastered you will smoke any one using a Vermeer SC252. These grinders accell in ground speed , tight quarters. I can remove a 48" maple in 15 minutes, a 20" stump in 2 minutes and a 10 in stump in 20 seconds. I`ve been using the machine for a few years and I see no need to go bigger. If stumps are bigger than 48" I sub it out. I make most of my bounty doing tree work but owning the grinder lets me offer the whole package and that gets me the bid in most cases.
These grinders store in small spaces, require little maintenence and can fit in the back of the chip truck , so no extra trailer / vehicle is required. If your a one man show its great. If you have employees running the equipment its a different story. The learning curve takes a bit before you get from frustration to production. I like my machine alot 20hp hydrostatic.
here is a pic of my one man show
http://www.arboristsite.com/attachment.php?attachmentid=15682&d=1093654483
These grinders store in small spaces, require little maintenence and can fit in the back of the chip truck , so no extra trailer / vehicle is required. If your a one man show its great. If you have employees running the equipment its a different story. The learning curve takes a bit before you get from frustration to production. I like my machine alot 20hp hydrostatic.
here is a pic of my one man show
http://www.arboristsite.com/attachment.php?attachmentid=15682&d=1093654483
Heres what ya want Sal
http://cgi.ebay.com/Rayco-RG20-HD-S...1QQihZ016QQcategoryZ63924QQrdZ1QQcmdZViewItem
http://cgi.ebay.com/Rayco-RG20-HD-S...1QQihZ016QQcategoryZ63924QQrdZ1QQcmdZViewItem
Stumper
One Man Band
If a person can have only one the small walkbehinds are the class to have. I have a Rayco RG12-As GlenG said -it will smoke the small hydaulic machines.
green teeth could you tell me whats the difference. why do shallow teeth work better. I work for tree company and getting grinder to make some cash after work and on weekends. My knowledge on stump grinders is limited and want to get it right when i buy machine. Its a lot of money for me that said i want to buy a quality machine. I am in NY does $6200 sound high for NYhornett22 said:
Stumper
One Man Band
$6200 for a new 20hp with Hydro drive? Sounds reasonable for anywhere. -Used machines can be found much cheaper...but they are used.
km stumps
ArboristSite Lurker
multi tip stump grinder wheel
hi does any one use multi tip stump cutter wheel and teeth , as we are going to fit one to our vemeer sc252 machine , i have some cnflicting info does any one use the out there.
hi does any one use multi tip stump cutter wheel and teeth , as we are going to fit one to our vemeer sc252 machine , i have some cnflicting info does any one use the out there.
Cornubia06
ArboristSite Lurker
hornett22
Addicted to ArboristSite
the deep dish teeth are better for soft wood like .......
pine and willow supposedly.they recommend the deep ones but the shallow ones seem to work better and not bog the machine down as much.i'd run the stock teeth till they are dull and have them sharpened by a sharpening service and keep them as spares.green teeth are just easier to change out and cheeper in the long run.
pine and willow supposedly.they recommend the deep ones but the shallow ones seem to work better and not bog the machine down as much.i'd run the stock teeth till they are dull and have them sharpened by a sharpening service and keep them as spares.green teeth are just easier to change out and cheeper in the long run.
ShermanC
ArboristSite Operative
- Joined
- Jan 25, 2008
- Messages
- 352
- Reaction score
- 195
beastmaster
Addicted to ArboristSite
I recently bought a use, but with really low hours husqavara stump grinder. It's a nice little machine for what it is, but kind of under powered with a 13 hp honda. I got a really good deal, otherwise I wouldn't of gotten it. For 6500.00 you should look at the biggist no frills stump grinder you can find, I use to have a little david stump grinder and it was small but mighty. I did some big stumps with it. It'd work your though.
mckeetree
Addicted to ArboristSite
An eighteen wheeler couldn't haul all those Dosko's we went through. But, believe it or not, our used ones brought pretty good money.
Toddppm
Addicted to ArboristSite
4 ft. Maple in 15 minutes, 20" in 2 minutes, 10" in 2 seconds!!!! 
Similar threads
