Khntr85
Addicted to ArboristSite
Yea guys I am about to buy a 461c model saw, and with all of the help from some really great people on this site, I have learned quite a bit about the model and what people who own it think about it.....I guess the most major question I have is what is the real difference between the 461c and the 461R model especially the oil output between the 2...... I am wanting to know what is the biggest bar I could run on the 461c, and know that the B&C is getting plenty of oil.... I mean you would think that if they say the saw will run up to a 32" B&C, that they would put a oiler that would at least keep up with the 32 B&C....... Any way guys I don't ever see me using over a 28 B&C, and it will probably be wearing the 25" B&C most it's life, but I would like to know from all you guys that have the 461c and 461R models think about the oil output, and the saws in general....
Thanks a lot guys and to all of you guys that I have PM'ed, thanks for corresponding with a guy that's so new to the site....proves what I could tell before I joined this site, that there is a lot of very smart, knowledgeable, saw "geniuses" on this site.... Thanks a lot kyle
Thanks a lot guys and to all of you guys that I have PM'ed, thanks for corresponding with a guy that's so new to the site....proves what I could tell before I joined this site, that there is a lot of very smart, knowledgeable, saw "geniuses" on this site.... Thanks a lot kyle