Stihl 08S bonging down with full throttle.

[Toasty McSpud]

Hello all,
In the passed I have posted a thread asking for help in diagnosing my Stihl. With the help of the members here I was able to address the issue had my old saw running well. At the end of last winter, the same problem of the saw idling ok, but bogging down and stalling when given full throttle returned. A friend of mine suggested it may be the crank bearing seals. I have most of the saw dismantled, but have run into a snag in getting the magneto drum off its spindle. I've searched the web, only to be able to find "flywheel" pullers. My saw has a bolt on flywheel that came off without a problem. Now I'm stumped on how to get the magneto drum off, in order to get at the seals I want to replace.
Does anyone know if there is a special puller I need to remove the drum?

Thanks in advance
Toasty McSpud

 

[HarleyT]

Might be in here.

 

[Toasty McSpud]

Might be in here.

Thanks for the download, however i wasn't able to open the PDF, are you able to resend it when you get the chance?

 

[HarleyT]

I don't think the problem is with the one I put up,

but we will try it again.

 

[RandyMac]

keep it out of the weed

 

[HarleyT]

 

[alexcagle]

Whack nut with hammer.....

Not too hard though.....

 

[Toasty McSpud]

I don't think the problem is with the one I put up,

but we will try it again.

Thanks Harley, I was able to.open that one no problem.