Search results

Undercuts holing it pretty much straight up and down at full reach , what if u don't want the branch to drop straight down but u want to cut 90 percent of the way and let the branch droop and hinge then cut to avoid fences and sheds or all the usual things , u really didn't get what I was saying...

461 a major f up ?? Guys love them over hear

I watched the vid 056 kid and i can see what your saying, hit a small knot on the first cut wipes out half the revs with no pressure on the saw , first time the spikes touch the log the chain comes to a stop and this is in a 18 inch log ... Question the torque get attacked by the body gaurds and...

I just throw the 088 one in and leave it at that , the grommet where the wires goes through the tank stops it from binding up and stuff

U should read the posts its been said a few times they still wont start after cracking the tank open

I remember mine saying max carb temp somewhere around 70 degrees celsius , 394 and 3120's were always bad for the same problem in summer all the boys would refill them with fuel while they were still running because you'd be to scared to shut them off

Plug it into the computer and look at the carb temps ... The carbs get hotter than the boiling point of fuel

Ive been through all the same crap with mine and theres no fix they just run too hot , dunno if its from been strato , the angled back head been to close to the carb , massive muffler acting as a heat soak or the engine cover been to tight around the cylinder to allow good airflow or all of the...

F , 1 year before

Use the pointy end of ya file that goes in the handle its a perfect fit

Inertia also activates the chain brake dont forget

I think the brake is more important on a top handle than any thing . Starting saws in funny positions on the fast idle ect near ropes that keep you from falling , shuffling round quickly trying to get in a better spot for a wind change or something funny like that ...

I see a really nice yz 360 at the track from time to time with the tank straps , silver with red stripes up the tank .. Nice old bikes

#VinceGU05 u dont still have that old dirt bike magazine by any chance ?? Ive been looking for memorabilia to go with one of my bikes

Good point , summer hear now tho but will do a few trips around christms time

Cat 920 superaxe 8 wheel tipper 084 395 and a big chain

Still got the heat sheild ? Ive had a couple leak up through the crankcases straight onto the muffler , pretty sure the gasket must get burnt and start to leak

Chainsaw oil !! Husky xp .. And probibly a few bottles of stihl oil

Last time i checked this saw had 270 hours of actual run time mostly used as my climbing/cherry picker saw with about 4 weeks thinning and a resonable amount of firewood thrown in aswell over probibly around 14 months or so @32.1 Has epic bog and never really been a great running saw , wanna...

What oil u running in that engine rev ? And does it "bog"