Search results

For sale is a very nice Husqvarna 353 chainsaw. We have been using this saw around the shop for about a year and it is time to sell it. This saw was well maintained and is all OEM. The cylinder has been ported for wood cutting. The work and compression are not extreme so it starts will a...

For sale is a very nice 372 x-torq. It has be rebuilt with new factory 6202 c3 crank bearings. The piston is a Meteor with Caber rings from wolf creek saw shop. The work is not extreme so it runs great on pump gas with good oil. All of the features work as they should such as the oil pump...

Hey buck. No worries. Its 275 plus worn parts Eric

yes

For sale is a very nice Husqvarna 357xp. This saw has been modded for performance wood cutting. The intake exhaust and transfers have been raised and lowered for increased timing. The intake and exhaust have been widened to 68%. The OEM cylinder has been turned down and the squish has been...

20in

Yes we did it in house

It does have the gasket. The base of the cylinder was cut on the surface grinder for 0.028" of squish. It makes about 170psi.

That and the handle bar are aftermarket. The crank, bearings, carburetor, and intake parts are factory.

For sale is a Ms440 that has a MS460 cylinder adapted to it. The intake and transfers have been mildly ported. The exhaust port was left alone it was just finished with 100 grit emery clothe. The work is not extreme so it starts and idles great. It starts with a couple pulls and cuts great...

77.8cc

For sale is a great running husqvrana 272. During covid we had two 272xp saws that needed cylinders so we put them together. They have been used here and there but it time to let them go. Since good 272 cylinders seem to become more rare than hen's teeth, we had some 288 cylinders machined...

good morning. Are you looking to get some porting work done?

The saw runs great. I dont know about hack work. Thankyou for the kind words. ;)

This is an amazing classic Husqvarna saw. This 254xp has been rebuilt from the floor up. It has new skf 6202 bearings and seals. It has a meteor piston that has been lightened. The cylinder is factory oem. It has been ported for fire wood cutting rpm. The work is not extreme there are no...

I just sold the saw on ebay

This is a great classis husky saw. This saw started life as a 61 but was converted to a 266xp with a factory cylinder caber ring and a high compression piston from the little red barn. Finger ports have been added to the rear of the cylinder. This modification really wakes these saws up...

Good afternoon. 346's are getting harder to come by up by me. So I won't have any for awhile. Just let me know what you need as far as work. I can probably take care of it. Cheers Eric

First thing thanks for the support over the years. This 394 is a great classic muscle saw. 1994 model year. This saw does have some damage to case the small bar above the recoil is missing. Those are always the saws that come out the best but, it doesn't effect the performance of the saw it...