Search results

the primer bulb should be hooked up as follows: the long leg of the bulb should connect to the longer fuel line going direct to the tank. the short leg hooks up to the short fuel line to the carb and the short fuel line from the tanki to the other side of the carb. the primer pulls fuel...

i bought the same tool on the left after having a bunch of the filter sockets slip on larger filters. it works great. the harder you pull the tighter it gets. i wish i had bought the larger one as well as the smaller one

the husqvarna battery mowers are more geared towards smaller lawns. we have a customer who bought one and complained that he had to recharge his batteries after 25 minutes of run time. he has a smal-ish yard. the mowers take 2 batteries and unless you want to spend the $1000 to upgrade to the...

the only thing i'd be woried about is rubbing on the frame and suspension when at full turn lock. you might want to look into either a small spacer or some different offset wheels if you get some rubbing

i know this is an old thread, but do you know if the saw is registered? it would have 3 years warranty from husqvarna from the date of purchase. might be worth looking into to get some new crank seals. they shouldn't leak on a new saw like that

I haven't been able to find a service manual for these yet and i have access to most manuals from Husqvarna. it just isn't there

would you happen to have a photo or two of the other end where the bolts go through the partition?

the only way you are going to be able to update the software is to bring it to a Husqvarna service center and have them hook it up to the Husqvarna Common Service Tool. its a program only available to Husqvarna Service Technicians. other than that, it is just as simple as start it and run it...

Glad I could help. sometimes the easy fix is the best fix

NGK BPMR7A is the only plug i run in Husqvarna saws. Husqvarna has their own branded plug, the HQT-1 is the same as the NGK. try a plug in another saw you know runs. then you will know whether its the plug or the ign.module.

sounds like youre gonna need to rebuild the carb. the diaphrams in them will everntually start to harden and won't work properly. look for Husqvarna part# 504 49 48-02. that's the diaphram kit i just put in my 61 and it runs amazing now. if you know of someone who has an ultrasonic parts...

I have 2 61's currently on my bench. the 1993 model has no gasket between the airhorn and carb. the 1988 version also does not have a gasket there. all the others i've had apart have all been the same. should only be 2 gaskets on the intake side, 1 between the carb and inlet spacer and 1...

Too bad this guy wants to use PayPal Friends and family option. That means there is no solid support to getting money back if something goes wrong. I would have bought the 119 otherwise. Sorry Jay but your cash is gone

does that $50 shipped include to Canada?

Being a service tech for Husqvarna BPMR7A is what we put in all the saws. NGK is what we use for any of the equipment actually. I won't use anything else. If a machine comes in with a Bosch or Champion plug its leaving with a new shiny NGK guaranteed. I have a few Sachs-Dolmar saws and the...

so it turns out my 119 has the internal ign coil and i need to replace it as it has stopped working haha. both my 116 super and si are both external coil. i haven't taken the base 116 apart yet to verify. i might just have to get all 3 116's on the bench and start comparing what parts fit on...

Far as I know the coil bolts on beside the flywheel same as the others. I’ve never seen an internal coil before

So what’s with the 116 Super? I read somewhere it was a mix of 116 and 116si parts. I can’t remember what it said of which parts from what. I’d like to get one or the other running. The Super needs an ignition coil but the Si needs a few other pieces. Would it be better to fix up the Si using...

Hey giys. So over the past 2 years I’ve been getting parts and pieces for my Dolar saws. I have a 116 that is complete, a 116Si missing pieces and is for parts for now, and a 116 Super that could run if I had an ignition coil. I’ve been reading a lot about the supers and how they are a...

Alright. Thanks everyone for your info. I’m glad I posted before cutting off the tab haha