Search results

Why is it necessary to tune the rev limited coil chainsaws in the wood, while cutting the chainsaw doesn't reach the max RPM so the tach can get a good reading so you can set the max RPM you want precisely? This is the difference between limited and unlimited coil chainsaw in what regard the...

Why is it necessary to tune the rev limited coil chainsaws in the wood?; while cutting the chainsaw doesn't reach the max RPM so the tach can get a good reading so you can set the max RPM you want precisely? This is the difference between limited and unlimited coil chainsaw in what regards the...

Why is it necessary to tune the rev limited coil chainsaws in the wood, while cutting the chainsaw doesn't reach the max RPM so the tach can get a good reading so you can set the max RPM you want precisely? This is the difference between limited and unlimited coil chainsaw in what regard the...

Dit you tried using it with a wire?

So I should continue with Aspen even if I use one ore max two 5 L cans per year and there are periods of over 6 months in which I don't use the saw at all? If regular gas evaporates or absorbs water, doesn't the gas from the Aspen2 mixture do the same? At the amount of use I put the saw trough...

Question about Aspen 2 If I have a half full can does it retain its qualities as a sealed can ? I only use my saw like 2 or 3 times per year, so I don't know if it is a good idea to use Aspen2 because of the long periods of time between usage, and with all the stabilizers and additives in it, I...

Do you know that a 5l can of aspen costs me almost a tenth of my monthly salary and they don't even sell it on Romania?

A friend sent me from Germany a 5l can of "aspen 2" by someone, but the can was opened by a guy from a car-wash ( I can't imagine why someone would do this... and he only noticed too late ), it's missing a little but my problem is that I'm not sure if it wasn't mixed or replaced with regular...

Hello I have a question for you Can you tell if a fuel is aspen 2 or not?; it looks the same but the smell differs...

new problem/question :)) I received a 5l can of aspen 2, but the problem is that it was opened and it is missing a little (long story) the question is: is there a way you could tell if it's aspen 2 or it was replaced/mixed with regular gas, it looks the same but the smell differs ... so I'm...

Question about tachometers: I don't really understand how to use a tach to set a saw: How can you measure the idling speed if the chain is not turning ? I want to buy a tach and learn to set myself the saw.

Went to a service (not from where i bought it) explained to the guy a full 10 minutes all the history and about Aspen fuel and so on. Said to him to tune it for Aspen, and to do an all-around check. I gave it to him with the tank full and he called 3 hours later : he said that he found some...

Is there a problem if I keep my saw indoor (20 + degrees, Celsius) and with fuel in the tank, can the fuel suffer some kind of alteration?

Dolmar 5105 and it has no cat, at least that's what they said at the dealership I went trough about 12 tanks of fuel

I’ve recently bought a 5l can of Aspen Alkylate 2 Besides less smell and less smoke I couldn’t notice anything better in comparison with regular gasoline+oil 1. The saw doesn’t idle more than 20 seconds, sometimes not even for 5 secs – I think this is the effect of switching to Aspen, is this...

I recently brought my saw from service( it would stop after a cut o 2 and wouldn't stay running at idle) I thought that it was flooding for some reason... The service guy said that it had water in the gas mixture, but I don't know how it is possible because I use quality fuel and I'm very...

I there a way to clean the inside of the cylinder ? I've removed the spark plug and looked inside and it doesn't look too good. Is there a method to clean the cylinder?

Do U have to re-tune the chaunsaw when you switch from normal gas to premixed?

What about the bar oil, are there any conditions regarding storage? Is it a problem if I let it in the tank for long periods? I've heard some say that they replace the oil with a little gas and run it thru the oil pump, because the oil tends to clog the pump.

I'm pretty sure I'll be switching to Aspen soon.I have only one more question: better/purer gas, doesn't deteriorate in time, premixed, friendly to the environment, better for the engine...; but how about the oil in the mix, from what I know you have to shake the container in which you have your...