Search results

I have burnt some in the past were i cut into some to see how bad it was maybe 1 or 2 sticks i always load up what i cut and burn it. My brother logged some white oak 2 years ago in the summer and the tops started rotting that fall i was hard up for wood and burnt several loads of the small...

It was less than $1000.00.Its very handy for alot of stuff because its very portable. Tomorrow i am going to remove a pole that is bolted down and the bolts are down in the dirt so with the saw i will do a little cleaning then cut one side of the nuts and chisel them off. If i didnt have it i...

I ended up with a Dolmar f 7314. Its been close to 100 out side so i havent used it alot but i run it some yesterday.I haul scrap iron and it helps to down size some stuff to make a better load or keep stuff from hanging over the truck or trailer.I had several things that were heeding some thing...

I will be cuting thin stuff alot of aluminium a bread truck nothing thick but it will be to big for a small grinder cut off wbeel.The stils look like they are layed out better if i didnt have the trade deal going on thats what i would look at I looked at a corded saw they make them to handle...

I will be cuting metals.

The reason i am thinking about a new saw is i have a troy built horse tiller that i got cheap and they will trade for it.Its been a very dry summer and it would take time to sale a tiller or i would sell it out right and go look around. Before i thought about the tiller i was looking for a used one.

I didnt know were to put this. I do alot of scraping and i want to get a quickie saw. Because i want to buy local there is 2 shops one sells Doimar and the other sells Huskey. Does any one know about ether of this saws. The huskey has one thing that is a plus in that ithere are more dealers around.

It looks good just a little wear here and there i hated to throw it in the junk if it was something a collecter wanted.

I have a AC 75 saw with case. I dont know anything about it other than they said it ran when put away. If some one wants it make me a offer that makes me want to ship it.

My house is small around 27 x32 with a half basement were my wood stove furnace is. The last stove i sat it beside were the gas furnace was before i removed it so i ran it into the duct work for the gas furnace. I now have a diffrent stove so i need to hook it into the duct work but it is totaly...

I got the Longwood cheap and its done the trick but theres several things about it i dont like. A good buddy of mine bought one of those furnaces that Orcilens sells he got it used. I told him i was thinking about buying a new one he found another used one and told me about it. I went and looked...

I have slow dial up and it would be faster and easyer to drive to a saw shop thats a hour away. I thought maybe there was a number some were on the saw or something. I will look at the adjuster. I need a top cover for this saw.

I got a Stihl saw that is missing the top cover and i was told it was a 034 how can i tell so i can get a cover?

You are going to use the brake as a clutch?

Fix your saws and get back to work time is the only thing that will repair your fillings for your girlfriend. I got a divorce 4 years ago and it about was more than i could take but i kept on working and every day was a little better than the day before.

I wish my stove had a shorter fire boxes. I let my fire go out often and it takes along time to get it hot so the blower comes on. I would like to buy a diffrent stove something with shorter fire box any stove would be shorter.

If you have a 1.5 or 2 ton it will handle 8 tons all day long . I have a f 600 and have hauled 11 tons on it before but thats not smart. I all so have a 1961 f600 it was a one owner they told me when they hauled gravel with it they hauled 10tons on it. I dont drive my f600 very fast but it...

I leave the house and dont come back for 11 hours normaly unless its real cold then i will drive 5 miles around lunch time to put wood in the stove. What i do is fill a bucket half full on diesel and soak some small sticks or split lumber and light one with palet wood to get it going. My stove...

I was kind of the same boat you are but i haul scrap Iron and other stuff. My dad dealt in used trucks and i am a truck mechanic so i am not green to trucks. I dont make alot hauling stuff so it was alot of money to me to buy something that would be a big gamble. What i wanted was a 2ton truck...

If the ports faced up the cylinder would be several inches from the beam.