Want to Buy 2100 v-stack

[Sea2SkySaw]

Looking for a functional velocity stack for a Husqvarna 2100. May be interested in more than 1 if the deal is right. I’m located in BC, Canada. Anyone know if there’s any suppliers or shops on the island or coast hanging on to these?

 

[sean donato]

This may sound a little off, but look up stacks for alx or rc max engines. Maybe something could be fitted off a larger goped engine as well, they use many of the same carbs our saws do anyway.

 

[Huskybill]

There’s some on eBay but you will need to fabricate the lower base adapter. You might want to run a foam oiled washable pre cleaner too. Just a thought.

https://www.ebay.com/itm/2pcs-50mm-...ike-POD-Air-Cold-Filter-Cleaner-/114230891076

 

[Sea2SkySaw]

There’s some on eBay but you will need to fabricate the lower base adapter. You might want to run a foam oiled washable pre cleaner too. Just a thought.

https://www.ebay.com/itm/2pcs-50mm-...ike-POD-Air-Cold-Filter-Cleaner-/114230891076

Yeah I’ve stumbled upon these and other filters. Im looking for the aluminum adapter that mounts to the intake, that’s proving to be quite elusive. Thanks though.

 

[cuinrearview]

@mortalitool @Definitive Dave

 

[sean donato]

This may help a bit it's for a wj71 carb.
Cheap enough
https://www.detroitperformancerc.com/product-page/rcmax-wj71-velocity-stack

 

[Jhenderson]

You might try Madsens. I bought one of their “ Hotrod Husky 2100s back in the 80s and it cam with the adapter and foam filter. They might have something lying around, or know where to find one.