Screwbolts
Never to many Engines!!
89HD, I see it is a prestolite unit you need not a Phalon.
Another question concerning magnesium cases, how can white death oxidation be stopped.View attachment 786697
I have a P39 and 42 that will use the one piece Phelon if I can find it.
But the P51 is different
What's the part # on those Phalon coils89HD, I see it is a prestolite unit you need not a Phalon.
Sure does look like it.I believe the Phelan coil is the same as used on Poulan anti-vibe saws.
I believe this is an eBay auction for a new coil of what I used on my P41S fix.
Proline Igniton Module Coil For Husqvarna, AYP, Poulan 545189701 Phelon for sale online | eBay
https://www.ebay.com/p/22021536176
Thanks, I will order oneI believe the Phelan coil is the same as used on Poulan anti-vibe saws.
I believe this is an eBay auction for a new coil of what I used on my P41S fix.
Proline Igniton Module Coil For Husqvarna, AYP, Poulan 545189701 Phelon for sale online | eBay
https://www.ebay.com/p/22021536176
Looking for a coil to work on Pioneer P51.
I read on here The husky 272 will work on some pioneers.
What's the latest news on replacing these ignitions? I have a few that need replacing.
I tried baking and got 1 spark from each that was it, then nothing.
It all depends how bad it is. Straight white vinegar has worked well on some minor stuff I ran into.Another question concerning magnesium cases, how can white death oxidation be stopped.
I have an opportunity to trade a few saws but in photos there seems to be a fair bit of white powder on them.
They are from the 1950's
It looks pretty rough in pictures a PM Canadien 275, PM360 and a Pioneer 650 if I can stop it then coat it with epoxy or something to preserve it, I would be happy with that.It all depends how bad it is. Straight white vinegar has worked well on some minor stuff I ran into.
Those are pricy, I think I'm going to bake them again for about 16 hrs, nothing to loose there.Pricy , NOS , Possible replacement coils for your P51 saws and similar Prestolite equipped units.
https://www.ebay.com/itm/Genuine-HOMELITE-A-93414-ignition-module-coil-solid-state-410-chainsaw-NOS-OEM/123729820773?_trkparms=aid=1110001&algo=SPLICE.SIM&ao=1&asc=40719&meid=7b047292c5204f3b8cf2b452330f5df0&pid=100752&rk=2&rkt=12&sd=264537981123&itm=123729820773&pmt=0&noa=1&pg=2047675&_trksid=p2047675.c100752.m1982
Those are pricy, I think I'm going to bake them again for about 16 hrs, nothing to loose there.
Would rather find another to fit rather than pay $150 for one that may not be any better.
The first used one there might be worth a try.
Thanks
Cool. I never realy understood the whole boost port deal? Is the port on the cylinder itself or is it machined into the jug?The P39 Plus have the boost port on them
Enter your email address to join: