• Please be aware that we have recently gotten a wave of users that, when researched, are found to be from Nigeria. They are trying to sell products and asking to be paid through Zelle or Venmo leaving users with no recourse if they don't ship the product. If you suspect this activity please contact admin and we will research their information to verify their location.

ArboristSite.com Sponsors
Peak Industries


porting my stihl 046

big bore

big bore

ArboristSite Lurker
Joined
May 7, 2011
Messages
5
Age
55
Location
USA
hi all, im new around here so bear with em. i have recently bought a stihl big bore kit for my 046 and after reading and seeing vids on ported saws i gota have one . im just wanting to do the intake and exhaust now to play it safe. any way the baileys kit i have looks pretty ok. are these in need of much work? if they are , how far on the exhaust , and the intake hole is kind of crappy looking , its round and flat on bottom.(from the outside looking in) its also kind of off center . is that normal.
should i make it round on the outside, there is allot of metal there?
:confused: i have port matched the exhaust , but not changed the inside at all. thanks for any helpful advice.
 
atvguns

atvguns

Addicted to ArboristSite
Joined
Sep 16, 2010
Messages
2,819
Location
South Central MO
evedently your thread has been overlooked have your tried looking through some of the port threads so good info in there maybe some one will pipe in in a little while with some info on the big bore kits
 
Top