Seasoning Pine Rule of thumb?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
chainsawaddict

chainsawaddict

ArboristSite Guru
Joined
Mar 9, 2008
Messages
668
Location
NW NE
I have never burnt much pine, but Ive recently had too much easy pine to pass up. This pine was burnt in a large fire in the summer of 2006, and mainly just blackened it and burnt off the needles. It was felled by the forest service in the winter of 2007 (Nov-Dec). I have been bucking and splitting it since this spring. It appears that most of the pitch in the bark was kinda burnt off. Will this wood be ready by the time snow flies?(another month and a half.)
 
Zackman1801

Zackman1801

ArboristSite Guru
Joined
Dec 14, 2007
Messages
555
Location
Buckfield maine
i think if you leave it out and dont let it get wet it would be ok, pine seasons really quickly, but i wouldent let it season too long because it burns quickly as it is, if its really dry you might not get much out of it.
 
Basso

Basso

ArboristSite Operative
Joined
Feb 25, 2007
Messages
114
Location
Maryland
Cure the Pine

Hello,
I have always heard that pine should be really seasoned for a good while before you burn it. The reason is so the pitch in the wood does not create a lot of creosote in your stove pipe. So, I don't burn any pine until I let it dry two or three years. Also, burn it hot and don't let it smolder to eliminate any creosote problem. When it's real dry, it does burn hot and fast, but I control the heat by the amount that I put in the stove. You have to load more often, but I really like the quick heat that it puts out.

Basso
 
chainsawaddict

chainsawaddict

ArboristSite Guru
Joined
Mar 9, 2008
Messages
668
Location
NW NE
Hello,
I have always heard that pine should be really seasoned for a good while before you burn it. The reason is so the pitch in the wood does not create a lot of creosote in your stove pipe. So, I don't burn any pine until I let it dry two or three years. Also, burn it hot and don't let it smolder to eliminate any creosote problem. When it's real dry, it does burn hot and fast, but I control the heat by the amount that I put in the stove. You have to load more often, but I really like the quick heat that it puts out.

Basso

Seems to be good for morning fires, warms the house up again quick.

Interesting. Some say two-three years seasoning, another says it seasons quickly.:monkey:

This stuff has been dead for two and a half years, but not bucked and split till this spring.
 
Basso

Basso

ArboristSite Operative
Joined
Feb 25, 2007
Messages
114
Location
Maryland
Hello,
It doesn't take that long for the pine to appear seasoned on the outside, but I'm not sure what is going on in the inside. For that reason, I wait two to three years.....hey I'm retired and I'm not in a hurry! I have plenty of wood , however, one can never have enough !!!!!

Basso
 
cjcocn

cjcocn

Tree Freak
Joined
May 16, 2006
Messages
13,619
Location
Manitoba, Canada
..... This stuff has been dead for two and a half years .....

Stick a fork in it - it's done.

I burn pine (jack pine) almost exclusively and only clean my chimney once per year. Never had a lot of junk to clean out either (not enough to make me want to clean more than once a year).

Mostly I go for the standing dead stuff that is already dry, but sometimes I will cut green stuff in the winter, leave it stacked for the spring/summer, and burn it in the fall.

HTH
 
Mike Van

Mike Van

Addicted to ArboristSite
. AS Supporting Member.
Joined
Nov 25, 2007
Messages
2,238
Location
Kent Ct. USA
I burn a lot of eastern white pine slabs [hemlock, spruce & some red pine too] from my mill. Most go into the evaporator for making syrup. Some are 1", but others will go up to 6" if there's big knots or a big bell on the log. One summer under cover is all they need to burn fast & hot. The outside of pine [sapwood, about 2 -3 inches] Has most of the moisture & sap contained there. The heartwood [rest of the log] seems to weigh half what the outside does.
 
woodbooga

woodbooga

cords of mystic memory
Joined
May 7, 2008
Messages
11,943
Location
Between Gonic and Chocorua
I burn a lot of eastern white pine slabs [hemlock, spruce & some red pine too] from my mill. Most go into the evaporator for making syrup. Some are 1", but others will go up to 6" if there's big knots or a big bell on the log. One summer under cover is all they need to burn fast & hot. The outside of pine [sapwood, about 2 -3 inches] Has most of the moisture & sap contained there. The heartwood [rest of the log] seems to weigh half what the outside does.

I've noticed this too.

In a conversation with another woodburner on the pine topic, I heard him poo-pooh the creosote thing to another guy and told him if he was really concerned, he should just buck between the whorls, since the sap is thickest at the knots.
 
chainsawaddict

chainsawaddict

ArboristSite Guru
Joined
Mar 9, 2008
Messages
668
Location
NW NE
Stick a fork in it - it's done.

I burn pine (jack pine) almost exclusively and only clean my chimney once per year. Never had a lot of junk to clean out either (not enough to make me want to clean more than once a year).

Mostly I go for the standing dead stuff that is already dry, but sometimes I will cut green stuff in the winter, leave it stacked for the spring/summer, and burn it in the fall.

HTH

Thats what I wanted to hear!:greenchainsaw:

Ill keep an eye on the chimney, but Im not too worried. Im gonna keep cutting this stuff. probably 40 cords left in a big pile right by the road. I can seriously fill up my pickup in 30 minutes.:clap:
 
Coldfront

Coldfront

Addicted to ArboristSite
Joined
Aug 17, 2008
Messages
1,506
Location
NW Wisconsin
Pine is ok to burn but when it really gets cold you have to get up and stoke the fire every couple of hours, and it is a pain. But if that is all you have to burn heat is heat, just a lot of extra stoking of the fire.
 
LarryTheCableGuy

LarryTheCableGuy

Addicted to ArboristSite
Joined
Nov 17, 2005
Messages
7,427
Location
WTF Pitchers Thread
Last year I dropped a 24" dia. pine (live & healthy), bucked, split and stacked it around the end of August or beginning of September.

I started burning the stuff on the outside of the stack in January and worked my way in to the center. There were some pieces that weren't ready yet but most of it was.

We do happen to have exceptionally low humidity here which helps.

.
 
chainsawaddict

chainsawaddict

ArboristSite Guru
Joined
Mar 9, 2008
Messages
668
Location
NW NE
Pine is ok to burn but when it really gets cold you have to get up and stoke the fire every couple of hours, and it is a pain. But if that is all you have to burn heat is heat, just a lot of extra stoking of the fire.

Ive got a fair amount of oak, ash, and elm to mix in with it. Stoking the fire is my favorite part though. Im wierd like that.:greenchainsaw:
 
avalancher

avalancher

Arboristsite Raconteur
Joined
Dec 7, 2007
Messages
4,316
Location
Newport TN
Ive got a fair amount of oak, ash, and elm to mix in with it. Stoking the fire is my favorite part though. Im wierd like that.:greenchainsaw:

Well,come on over to my place for dinner then, and I will place you a chair right by the stove. Got a bunch of worthless Poplar that needs burning up.
i dont have the patience to burn it in the house, and the wife hates the smell.
 

Latest posts

Top