Crappy Stihl Cylinder - Looks like ChiCom Garbage!!!

[weimedog]

Probably a good idea to go play in the box your kids came from on mothers day....I still would rather think that cylinder is the exception instead of the rule.

 

[edisto]

If Stihl Inc was to read this thread they would have grounds to sue Brad, no joke they do. However they don't bother with non-sense like this, they build equipment, not roll in BS.

We've gone from sublime to ridiculous to...wait. What's more ridiculous than ridiculous?

Unless Brad actually lives in Brazil...and made the cylinder himself to bring down the evil empire! Long live the rebellion!

2010 all this saw building stuff is gonna ceased when the EPA starts looking at this site and see's who breaking the laws, not paying taxes on the money switching hands.

Here's another gem. Stihl has better things to do than read a chainsaw forum, but the EPA doesn't?

 

[THALL10326]

Tommy...that's the Stanley Cup of horse hockey.

Remember the top post above? Where mahle couldn't keep up with demand? So Stihl was making their own?

Now that cylinder, which is no where marked 'Mahle,' has magically morphed into a Mahle cylinder?

Like others have correctly pointed out, you went from Step A to Step J, and you didn't hit a single gol-danmed letter in between.

Your horse hockey just got called for icing.

Lay it down, Tommy. I hate to mix my sports analogies, but even your cut man can't stand it anymore.

Don't answer that bell. I'm afraid it tolls for thee.


.

Pssssssssst Woodie, maybe, hey see that, maybe, maybe I was wrong, LOLOLOL Least I did find out where it came from along with finding out Mahle is now in China and Brazil. Spike warned you guys about that...

 

[wigglesworth]

Hey I stopped reading the other day at page 36, do you think it is worth my time to go back and catch up? Did I miss anything? Any new breakthrough's?

 

[Woodie]

Woodie, you seem to have a comprehension problem, it seems to be a continuing pattern, where did I say in regards too this issue, nothing specific just in general.

Indian, I can assure you any issue with my comprehension springs from your writing...not my reading.

As an example, can you give us all some sort of idea as to what the hell you have strung together above?


.

 

[THALL10326]

Probably a good idea to go play in the box your kids came from on mothers day....I still would rather think that cylinder is the exception instead of the rule.

Probly would be more fun, I see another same ole player has arrived, you wanna use my shovel or would you rather hold the bucket,hehe

 

[THALL10326]

Indian, I can assure you any issue with my comprehension springs from your writing...not my reading.

As an example, can you give us all some sort of idea as to what the hell you have strung together above?


.

Your not in his league Woodie and he doesn't play your games, stick with me,hehe

 

[weimedog]

Woodie, you seem to have a comprehension problem, it seems to be a continuing pattern, where did I say in regards too this issue, nothing specific just in general. I'll say it again in a different manner, so you get my meaning.
I'll take the word of a experienced tech of any brand of saw on any subject over and enthusiast, if the tech has been at it for years and is experienced, whether its chain saws, cars, trucks, planes, trains whatever it is that needs worked on.


All you give a damn about is bashing Stihl. The cylinder sucked, I hope Husky doesn't have the same issue but it seems possible since they use the same supplier who mfgs in Brazil and China.

I couldn't give a damn about which brand of saw is in my hands as long as it is dependable and does what I want it to. Hell send me a 372 and we'll run the crap out of it with no prejudice, probably be just as good or better than anything I've got. Send me a Dolmar same thing.

You just stay on the band wagon get your saw modded run the thing at 15k and we'll see how long it last using it like we do. It will fail sooner that that sorry cylinder that was used as an example, and thats just my opinion which isn't worth a damn as I'm not a saw guru, I just put good mix in them, bar oil, use sharp chains and maintain them at the end of every day I use them,
they don't sit on a shelf to look pretty nor I use them to cut cookies and
any of the major brands, preferably of European origin work for me.

You guys need to grow up and get over the Stihl vs Husky issue, your not in High School any more, it's just like Ford and Chevy after you mature you couldn't give a crap less, long as it gets you there.

I'm tryin to understand the point here...maybe two sentences would cover it:
1) You all shut up about this bad cylinder because your not a real "Techs".
2) This is just a Husky vs. Stihl thread & therefore invalid

To me this is about manufacturing standards and the potential change in whats acceptable. Its about economic pressures driving the quality down to maintain a margin...or increase profitability of a particular product line...sort of like what happened to the "Winchester" line of products after 1964...or imagin what would happen to the Ruger line should they have porous investment castings on the model 77 receivers? (THAT would be a nasty picture)....Or better yet when Marlin bought a bunch of Niigata CNC Horizontal mills back in the 1980's to INCREASE the quality of their receivers...and DID! (A great move on their part)

When you spend the big bucks on a pro saw, you want the "good" stuff inside. A pro certainly doesn't want some rationalization as to why crappy parts are "OK".

 

[Woodie]

Hey I stopped reading the other day at page 36, do you think it is worth my time to go back and catch up? Did I miss anything? Any new breakthrough's?

So far Skipper and Gilligan are still stuck on the island, no one knows what the hell indiansprings is talking about, and Timmy is trapped under the tractor again...


.

 

[wigglesworth]

So far Skipper and Gilligan are still stuck on the island, no one knows what the hell indiansprings is talking about, and Timmy is trapped under the tractor again...

oh.....same old same old huh

 

[wigglesworth]

Anybody figured out which is better yet brand "A" or brand "B"?

 

[THALL10326]

We've gone from sublime to ridiculous to...wait. What's more ridiculous than ridiculous?

Unless Brad actually lives in Brazil...and made the cylinder himself to bring down the evil empire! Long live the rebellion!



Here's another gem. Stihl has better things to do than read a chainsaw forum, but the EPA doesn't?

2010 EPA is hammering down, the dealers all know it, are you a dealer??

Naaaaaaaa Brad has nothing to worry about, that I do agree with you..

 

[2000ssm6]

In this country, anyone can sue anyone else for anything.

Stihl would be laughed out of court for that one, though. The case would be dismissed with prejudice, Brad would sue successfully for malicious prosecution, and Hans Peter Stihl would be brought to the town square and bich-slapped before God and man.

DISMISSED!


.

Dismissed my butt. No body here could win a case against Stihl, the wording and way of posting could really get him in deep doo doo. Look at the few here have thought against buying a Stihl since reading, that is grounds for "loss of sales" right there. Do you really think he could win???

Woodie, you are out of good posts, the bashing has been done and nothing else good has come from this thread. Leave while you Stihl have a few hairs left we can mop the floor with.

 

[2000ssm6]

Anybody figured out which is better yet brand "A" or brand "B"?

Yup, Echo!!! Go Echo!!!

 

[weimedog]

Probly would be more fun, I see another same ole player has arrived, you wanna use my shovel or would you rather hold the bucket,hehe

First..I am right about that cylinder being an "anomoly" ..Right? You must have seen more than a few..bet you haven't seen one that nasty yet..have you?

 

[THALL10326]

So far Skipper and Gilligan are still stuck on the island, no one knows what the hell indiansprings is talking about, and Timmy is trapped under the tractor again...


.

LOL, Woodie show me you got a set, man up, did it say 1.6HP or 1.6cu.in, come on let me hear it. Come on, let me hear you say what it really said, come on, just say what it said, easy to type, repeat after me, 1.6cu.in, not 1.6HP like you was blow harding about as usual,LOLOL

 

[weimedog]

LOL, Woodie show me you got a set, man up, did it say 1.6HP or 1.6cu.in, come on let me hear it. Come on, let me hear you say what it really said, come on, just say what it said, easy to type, repeat after me, 1.6cu.in, not 1.6HP like you was blow harding about as usual,LOLOL

What does this have to do with that cylinder?

 

[2000ssm6]

What does this have to do with that cylinder?

What does 98% of these posts have to do with anything?

 

[Woodie]

Dismissed my butt. No body here could win a case against Stihl, the wording and way of posting could really get him in deep doo doo. Look at the few here have thought against buying a Stihl since reading, that is grounds for "loss of sales" right there. Do you really think he could win???

Focus, Gilligan.

When are you going to learn nothing comes after 'dismissed'?


.

 

[Freehand]

What does 98% of these posts have to do with anything?

Best reply in the whole darn thread