*** Fundraiser *** Pioneer/Partner P62

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Raffle prize #4

Ok guys- here's another prize for this fundraiser. Now before you guys look at the pics and go "Oh yeah, another ho-hum saw..." I have to tell you, this isn't an ordinary 257.

For starters, it has a new 262XP cylinder, piston, rings, and crank. It has a good used 262 ignition and flywheel. I went through this late last year and split the cases; it has new main bearings, seals, gaskets, and fuel system. However, it's not a 'true' 262 conversion because it still has the 257 carburetor and clutch. This saw has a lot of new parts and I have a lot of money and time invested in it. It comes with a nice 16" Windsor bar and two new Stihl 23RSK chains (It's set up for .325" because I don't have any 3/8" bars in this mount.) The Stihl 23RSK chain is the full-chisel, non safety chain.

The cylinder has some mild porting and port dressing inside and the piston has had some work. Needless to say, it runs fine. I think the winner will be happy with it. It does look good. The only thing this saw is missing is the brake band, so the chain brake does not work. The brake handle is new.

PC070076.jpg


PC070079.jpg
 
Last edited by a moderator:
Ok guys- here's another prize for this fundraiser. Now before you guys look at the pics and go "Oh yeah, another ho-hum saw..." I have to tell you, this isn't an ordinary 257.

For starters, it has a new 262XP cylinder, piston, rings, and crank. It has a good used 262 ignition and flywheel. I went through this late last year and split the cases; it has new main bearings, seals, gaskets, and fuel system. However, it's not a 'true' 262 conversion because it still has the 257 carburetor and clutch. This saw has a lot of new parts and I have a lot of money and time invested in it. It comes with a nice 16" Windsor bar and two new Stihl 23RSK chains (It's set up for .325" because I don't have any 3/8" bars in this mount.) The Stihl 23RSK chain is the full-chisel, non safety chain.

The cylinder has some mild porting and port dressing inside and the piston has had some work. Needless to say, it runs fine. I think the winner will be happy with it. It does look good. The only thing this saw is missing is the brake band, so the chain brake does not work. The brake handle is new.

Wow, nice JJ. Nice saw. Aint nothing wrong with those!!
 
Last edited by a moderator:
Ok guys- here's another prize for this fundraiser. Now before you guys look at the pics and go "Oh yeah, another ho-hum saw..." I have to tell you, this isn't an ordinary 257.

For starters, it has a new 262XP cylinder, piston, rings, and crank. It has a good used 262 ignition and flywheel. I went through this late last year and split the cases; it has new main bearings, seals, gaskets, and fuel system. However, it's not a 'true' 262 conversion because it still has the 257 carburetor and clutch. This saw has a lot of new parts and I have a lot of money and time invested in it. It comes with a nice 16" Windsor bar and two new Stihl 23RSK chains (It's set up for .325" because I don't have any 3/8" bars in this mount.) The Stihl 23RSK chain is the full-chisel, non safety chain.

The cylinder has some mild porting and port dressing inside and the piston has had some work. Needless to say, it runs fine. I think the winner will be happy with it. It does look good. The only thing this saw is missing is the brake band, so the chain brake does not work. The brake handle is new.

PC070076.jpg


PC070079.jpg

SWEET! You da MAN!
 
Last edited by a moderator:
to get in here is the link

https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=yqx492ax5vaqy

here is the list so far

pioneerguy600
jimm
bobwright
mdavlee
steve nw wi
leeha
lwhaples
mastermind7864
mruppe
kam
jeepfz450
sprintcar
walt41
tlandrum2002
gorving
c4f
aussie1
stinkbait
brian13
diggersdad
wildman1024
daddy66
modifiedmark
jacob j
blsnelling
tomdcoker
gmax
oscar4883
super3
rudedog
lwn9186
petesoldsaw
atpchas
stihl-pioneer
brianvt
tonym
atvguns
thieroff
schmuck.k
caleath
outdoorlivin247
steve1
zombiechopper
nmman
wigglesworth
parrisw
john inglis
rarefish383
barneyrb
busmech
keen
art3312
01cummins
freehandslabber
kev1n
hunt'n'photos
jeff villwock
mheim1
fatguy
wkendlumberjak
nardoo
jockeydeuce
andyshine77
mr. Bow saw
work saw collector
jmeritt
stephen.c
mike311
thorcw
pastryguyhawii
longwood
redlinefever
scooterbum
cat-face-timber
kingdavey
burvol
randymac
edisto
srcarr52
harzack223
bigblockburris
ray benson
saw.dr
eccentric
psj/wi
moparman


keep them coming guys!!
 
Last edited:
Ok guys- here's another prize for this fundraiser. Now before you guys look at the pics and go "Oh yeah, another ho-hum saw..." I have to tell you, this isn't an ordinary 257.

For starters, it has a new 262XP cylinder, piston, rings, and crank. It has a good used 262 ignition and flywheel. I went through this late last year and split the cases; it has new main bearings, seals, gaskets, and fuel system. However, it's not a 'true' 262 conversion because it still has the 257 carburetor and clutch. This saw has a lot of new parts and I have a lot of money and time invested in it. It comes with a nice 16" Windsor bar and two new Stihl 23RSK chains (It's set up for .325" because I don't have any 3/8" bars in this mount.) The Stihl 23RSK chain is the full-chisel, non safety chain.

The cylinder has some mild porting and port dressing inside and the piston has had some work. Needless to say, it runs fine. I think the winner will be happy with it. It does look good. The only thing this saw is missing is the brake band, so the chain brake does not work. The brake handle is new.

PC070076.jpg


PC070079.jpg

Yeah, even for a non Husky guy that would be nice. Now I gots to enter again!
 
Last edited by a moderator:
I can't believe how much all you guys stick together on here. I just made a second donation ( I would have gave more again but because of this damn site I just bought an 026 tonight which makes 4 Stihls in 2 weeks ). I don't really care or plan on winning anything but it's nice to help someone in need. I figure that I still have my health and not as many people are as lucky a I am to have 3 healthy kids and a job.

I think it would be cool to give them part of the donation after dinner and then show them where it came from. I really don't care if they ever see my name, it's just nice to know that the money is going to a good cause. I think the sooner you give them something it will take some of the burden off their shoulders and they will be able to enjoy the holidays that much more.

:bowdown::bowdown::bowdown: To all the people that are making donations to us here and the families.
 
Last edited:
I can't believe how much all you guys stick together on here. I just made a second donation ( I would have gave more again but because of this damn site I just bought an 026 tonight which makes 4 Stihls in 2 weeks ). I don't really care or plan on winning anything but it's nice to help someone in need. I figure that I still have my health and not as many people are as lucky a I am to have 3 healthy kids and a job.

I think it would be cool to give them part of the donation after dinner and then show them where it came from. I really don't care if they ever see my name, it's just nice to know that the money is going to a good cause. I think the sooner you give them something it will take some of the burden off their shoulders and they will be able to enjoy the holidays that much more.

:bowdown::bowdown::bowdown: To all the people that are making donations and to us here and the families.

Well said, Rep when I'm reloaded.
 
Since we now have several items up (Thank you guys) , how about the first name Stihlboy draws gets the P62, and the next names get their choice, in order they were drawn. Sound OK to everybody?
 
Wow.



Well guys, here's the deal. I have some friends that have fallen on very tough times. Bob and Kate are like parents to me. They were not able to have kids, they consider me a son. Over the years they have helped my family and I in many ways. Bob recently had major heart surgery and a pacemaker installed. Kate is diabetic and has other issues also. They are getting buried in medical bills and are having a very tough time. Bob already sold most of his possessions to raise money. Now it's come down to him selling some of his firewood that he heats the house with. (I can restore his pile easy enough.) Secondly we have another very good friend, a single mom with an autistic child. She recently lost her job and is having a tuff time.

My desire to help my friends outweighs my checkbook. I decided to put my favorite saw up for a fundraiser. Here is the link when I completed the saw - http://www.arboristsite.com/showthread.php?t=142517
I will divide the money raised from this fundraiser between these two families the best I see fit. I will deeply miss this saw, but I believe it will bring a smile to the winners face, and the money raised I know will bring a smile to my friends faces. To me that's a win win situation.
Donations will be $10 each. Each donation will give you another chance at the saw. Fred (stihlboy) has agreed to be in charge of name keeping and drawing the winner. Thank You Fred!! We did not decide on a drawing date yet. We are thinking of letting it run a few weeks or so (maybe new years day).
Please do not make a post yet until Stihlboy gives the details.

A couple recent pics of the saw I took today. I has not had more than 3 tanks through it. Basically the same condition as the link above.... but with a little dust/bar oil on it now.

arrowheadpioneer


arrowheadpioneer

If there is interest, and it'll bring donations up, I'm willing to put in this XL12 into the raffle. Its in really nice condition, I think it was put away for lack of spark. So it needs a new fuel line, and has a no spark condition.

attachment.php


attachment.php

If you'd like a 3rd place prize I have a decent looking Homelite Zip I'd be willing to donate. It's complete and good shape, the outer part of the "muffler" was lost years ago, and one was fabricated up. Besides that it's a good clean saw, it's been sitting a while so I'll go through and do a full service on it before it leaves.

DSCN0515.jpg


DSCN0512.jpg

Ok guys- here's another prize for this fundraiser. Now before you guys look at the pics and go "Oh yeah, another ho-hum saw..." I have to tell you, this isn't an ordinary 257.

For starters, it has a new 262XP cylinder, piston, rings, and crank. It has a good used 262 ignition and flywheel. I went through this late last year and split the cases; it has new main bearings, seals, gaskets, and fuel system. However, it's not a 'true' 262 conversion because it still has the 257 carburetor and clutch. This saw has a lot of new parts and I have a lot of money and time invested in it. It comes with a nice 16" Windsor bar and two new Stihl 23RSK chains (It's set up for .325" because I don't have any 3/8" bars in this mount.) The Stihl 23RSK chain is the full-chisel, non safety chain.

The cylinder has some mild porting and port dressing inside and the piston has had some work. Needless to say, it runs fine. I think the winner will be happy with it. It does look good. The only thing this saw is missing is the brake band, so the chain brake does not work. The brake handle is new.

PC070076.jpg


PC070079.jpg
 
Last edited:
Back
Top