On a side note when i first got the saw from my neighbor i took apart the carb and cleaned it out and the exhaust (which was fine) and then just did some general cleaning of the saw its self. When i put it all back together it pretty much fired right up and seem to run pretty good. When i took it back to my neighbor (an hour or 2 later) and tried to fire it up for him it was a no go. A few days later i tried to start it up again and it fired up but then choked out on idle after about 10-20 seconds of running and then wouldn't fire up again. sense then I have not been able to get it to start again and i have pulled apart the carb again and changed the spark plug... any one have an idea of what i might need to look at next... any thoughts would be awesome
thanks again