lets get Christmas started early this year

[sefh3]

I have an 041 farmboss I thought I was going to mess with. Has some good parts on it.

Please check your pm's.

 

[rocketnorton]

I have 2 new Pioneer brand chains - 3/8" -.058- 60DL-16". Never been on a saw. I bought them thinking I would get a .058 bar down the road, but never did. If someone can use them I will ship them for free. Happy Holidays!!View attachment 317927

am getting bar that uses that chain for pioneer, im n. of 49, so shippin could be bad, id help...

 

[rocketnorton]

I want to step in and remind everyone that this is a GIVING thread... not a LOOKING FOR thread. It's always better to give. TLandrum is starting this thread again... what has it been, 3 years in a row now?? Let's not get this muddied up with side conversations with folks looking for free parts.

TFB

jack talked me into it last nite, seen the error of his ways & removed this a.m.

 

[Steve NW WI]

Subscribing. I should have something to offer up over the weekend.

 

[kc4sfe]

I have a 25" slightly used green dot Stihl chain that has a lot of life in it. I switched to full and half skip on my 25" bar and don't need this one. Will mail it to whoever needs it.

Probably need to know that it is a 3/8" pitch .050" gauge chain also...


The chain has found a new home!

 

[mainewoods]

am getting bar that uses that chain for pioneer, im n. of 49, so shippin could be bad, id help...

No need to worry about shipping, it's all taken care of. Send me your address and they are yours.

 

[o8f150]

guys I was going to get a few things together but that didn't work,,, a guy come by this morn to get a purge bulb for his eager beaver,,, he came back 2 hours later with the dang thing in a box wanting me to replace all the fuel lines and put it back together,,, jerk,,, yep,,, still charged him 30.00,, then another guy come by with a cub cadet mower with a deck idler that hand gernaded,, so needless to say I haven't had to much time today,, geeze what a day

 

[mainewoods]

guys I was going to get a few things together but that didn't work,,, a guy come by this morn to get a purge bulb for his eager beaver,,, he came back 2 hours later with the dang thing in a box wanting me to replace all the fuel lines and put it back together,,, jerk,,, yep,,, still charged him 30.00,, then another guy come by with a cub cadet mower with a deck idler that hand gernaded,, so needless to say I haven't had to much time today,, geeze what a day

Cheap enough and good for you ! I have an Eager Beaver if you ever need any parts!

 

[MnSam]

A few carbs:
Stihl Walbro WT 283C - low speed adjust only
Walbro WT391 - full adjust
Walbro WT67 - full adjust
Walbro WT562 full adjust
Walbro HDA - full adjust but missing high speed screw (hole is clean, looks like it was just removed)
Tillotson - full adjust, unknown model

No idea/can't remember what they are from. Take one, take all. I'd expect them to need a going through prior to use.

 

[MnSam]

Some MS440/044 plastics. Not perfect, but fully functional.

 

[mdavlee]

The bars are gone.

 

[Jimmy in NC]

I will send a chain of square ground Oregon to you or somebody else who wants to try one, I have Oregon .050 and .063..

I drilled out the hex part of the head on my H needle,.. long story.. actually short, I got in a hurry

Sent you a PM/conversation....

Sent from my MiniMac running E-85!!

 

[djones]

I got one and a half Jred 2036's,bar and .325 chains that are surplus to my needs and a complete Mac 10-10 that looks decent but don't run.

pm sent

 

[djones]

I have a Poulan 2150 that runs but needs some plastic a clutch, clutch cover, b&c that I'm tossing into the Christmas pool.

 

[jayhawkinmi]

Jonsered 2165/2171 tank/handle and coil. The tank is missing the caps, but is otherwise fully functional, and has all AV springs if I remember correctly.

Edit--tank HAS a gas cap and AV springs, stop switch, trigger, and trigger cable.

Tank is spoken for, but coil is still available.

 

[workshop]

I'm going to be digging in the shop tomorrow. I know there are some goodies out there, just have to find them. I'll post them when I confirm them.

 

[diggers_dad]

I'm going to be digging in the shop tomorrow. I know there are some goodies out there, just have to find them. I'll post them when I confirm them.

Some goodies?????

Steve, I've seen your garage. Saying you have SOME goodies is like saying the government has SOME debt issues. You hoard worse than I do.

 

[diggers_dad]

Next items:

Surely someone can use these Weedeater brand cutting heads. I have two. Both are new, in the package and preloaded with trimmer line. You can see the models they are built for on the packaging. Your mileage may vary. One per household please.

dd

 

[tlandrum]

I love to see folks in such a giving mood

 

[workshop]

Some goodies?????

Steve, I've seen your garage. Saying you have SOME goodies is like saying the government has SOME debt issues. You hoard worse than I do.

I've got to wait till the wife gets home from work. There's stuff in the back of the Explorer, too. Maybe it's easier to say, "what do you need, I'll see if I've got it"