Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[67L36Driver]

Main line is clear out to the street. No more ankle deep showers. The gray line basement drains wouldn't clear in 100 feet of the rooter. Not real sure what my options are now. Guess I could have a better idea if'n I knew where it left out at.

Look around downhill from the basement floor level. Extra wet spot.

Later this summer it may be where the grass is still green is where it comes to daylight.

 

[Scott Kelly]

Making a little progress.. New meteor piston and caber rings. Cleaned up the piston ports, does anyone know if this is actually beneficial? I do it anyways but have always wondered. Squish is set from factory @ .031". I've found that card stock off of stickers brings it right to .019". A little tight but I'd say still acceptable for that small of a bore or am I asking for trouble?

 

[Homelite410]

I run squeak at .018". No problems in 3 years.

 

[Scott Kelly]

Well the intake is pretty well in the shape that I want it.. Might do a little more smoothing but I did cut through so better judgement says it'll be fine while the boot can still cover it up[emoji58]

 

[Hedgerow]

Well the intake is pretty well in the shape that I want it.. Might do a little more smoothing but I did cut through so better judgement says it'll be fine while the boot can still cover it up[emoji58]

What is your intake duration?
Try not to remove material from the floor if you can avoid it.

 

[cobey]

Something I found........ An 81dl bar (echo or Mac) is a 23" bar
A 84 driver bar (husky) is about 24"
A 70 driver bar is about 19"
A 72 driver is Close to 20"

That's what may tape says anyways

 

[Scott Kelly]

I don't have a degree wheel to put on it but I didn't take much of anything off the bottom

 

[jerrycmorrow]

Main line is clear out to the street. No more ankle deep showers. The gray line basement drains wouldn't clear in 100 feet of the rooter. Not real sure what my options are now. Guess I could have a better idea if'n I knew where it left out at.

probly about 105 feet from the basement. you got a direction? stake out where the 100' mark is. get a witching stick or welding rod or whatever and have at it.

 

[67L36Driver]

The 'Coppertone' girl. Hooskeybarney with a bad sunburn.



What is the cover at the top part of the muffler for?

A home made muffler brace. We tidied it up with proper flat and lock washers.

Stihl decomp on a Hoosky. Extra clearance so it don't hang up.

Ran him cutting up a large branch out of the huge oak down the street. Fell out last night. Bar/chain rather much done for.

I have a new Oregon 20" K095 but it is way too short for this saw!

 

[mdavlee]

That's a piece to space the muffler off wood a little farther best I have figured.

 

[67L36Driver]

Something I found........ An 81dl bar (echo or Mac) is a 23" bar
A 84 driver bar (husky) is about 24"
A 70 driver bar is about 19"
A 72 driver is Close to 20"

That's what may tape says anyways

It also has to do with the space from the sprocket to the bar studs.
For example; 20"/70 dl is Mac, Homie, Remy old school saws. 20"/72 dl is Hoosky, Echo and the newer stuff.

 

[67L36Driver]

That's a piece to space the muffler off wood a little farther best I have figured.

Explains why it was mashed somewhat flat(ish)![emoji6]

 

[Scott Kelly]

Can anyone explain what different durations do to the saw? Like longer exhaust, longer intake ect..

 

[WKEND LUMBERJAK]

The 'Coppertone' girl. Hooskeybarney with a bad sunburn.
View attachment 430240
View attachment 430241

What is the cover at the top part of the muffler for?
View attachment 430242
A home made muffler brace. We tidied it up with proper flat and lock washers.

Stihl decomp on a Hoosky. Extra clearance so it don't hang up.
View attachment 430243
Ran him cutting up a large branch out of the huge oak down the street. Fell out last night. Bar/chain rather much done for.

I have a new Oregon 20" K095 but it is way too short for this saw!

That bar won't fit any whoo it will take a large husk same as the 2 jreds. I have a 42 " bar for it. Used it once or twice just because.

 

[WKEND LUMBERJAK]

Can anyone explain what different durations do to the saw? Like longer exhaust, longer intake ect..

Matt.

 

[cobey]

It also has to do with the space from the sprocket to the bar studs.
For example; 20"/70 dl is Mac, Homie, Remy old school saws. 20"/72 dl is Hoosky, Echo and the newer stuff.

The echo 590 use a 70 dl 20" bar. I run an 84 dl 24" LG mount husky bar and a 81dl 24" echo bar on it ...... adjustment is different but they both work.
I ran a 72 driver 20" on it also.
I run a LG mount husky 24" bar on my Lombard AP 42
(With adapters) it uses a 84 dl chain

 

[Scott Kelly]

Matt.

Where could I find this fellow?

 

[Homelite410]

Where could I find this fellow?

You should just call him. Please...

 

[Scott Kelly]

Right..

 

[Homelite410]

Matt= hedgerow