Not a huge load, but cut about 3 loads like this a week or two ago, Ash. Buddy got one like this and is getting this one too. I have plenty of ash logs sitting. I did snag a couple straight ones I might try milling.
Show Us Your Brag Load
- Thread starter Gypo Logger
- Start date
Help Support Arborist Forum:
mn woodcutter
ArboristSite Guru
I like the old Big Red! Those things are bullet proof. I have great childhood memories of beating the tar out of one of those!
Uzi
ArboristSite Operative
Maple that was around 75" at the root flare and probably 50" DBH
Trx250r180
Saw polisher
Does that float in water ?
mn woodcutter
ArboristSite Guru
msmith
ArboristSite Operative
Puttin' the Ranger to good use today.
Uzi
ArboristSite Operative
Nope it would make a better anchor weighs about 40k empty. But it will cross 4-5 feet of standing water without issues. The air intake is a good 7 ft off the ground.
Like a yacht in a small harbor
or like this when I'm in town at a job site. At least once i get there I can usually get an entire job in one load.
msmith
ArboristSite Operative
Nope it would make a better anchor weighs about 40k empty. But it will cross 4-5 feet of standing water without issues. The air intake is a good 7 ft off the ground.
Like a yacht in a small harbor
or like this when I'm in town at a job site. At least once i get there I can usually get an entire job in one load.
<iframe width="560" height="315" src="https://www.youtube.com/embed/aULRhgG_Az8" frameborder="0" allowfullscreen></iframe>
Ya, well, it's still the coolest wood getter on Arborist Site in my opinion.
msmith you should be shooting bambi today.
Bartman
ArboristSite Lurker
[photo=medium]2260[/photo]
here's one from last year, I wish I would have shot some pictures this past july when I was cleaning up a red oak I got. It stood 85 feet high and the trunk on the ground was 5'11''
here's one from last year, I wish I would have shot some pictures this past july when I was cleaning up a red oak I got. It stood 85 feet high and the trunk on the ground was 5'11''
Ferguson system
Iggesund Forest dealer
Ferguson Tea 20 with a load of windfallen spruce. 
msmith
ArboristSite Operative
You must be in real deer country. I'm in Raleigh County & couldn't get in the woods till this afternoon. No luck, heard only 5 shots.
Gypo Logger
Timber Baron
Yeah, it matches my bottle lol.
So here's my brag load, not the biggest or heaviest, but I think I got it loaded all right and didn't put to much strain on the truck or trailer.
It's a brag load to me because it's part of the wood for my new woodshed
.
Uzi
ArboristSite Operative
It's actually a 977 but yeah makes a great log truck. It came from govplanet.com but I got it through a broker. They sell quite a few HEMTT's HET's and other stuff like 2.5 and 5 tons there.
