• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Sell Dolmar 7910

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

t4driller

ArboristSite Operative
Joined
Sep 6, 2014
Messages
347
Reaction score
413
Dolmar 7910 that I ported. Runs strong and like the way it handles, just need to move a couple saws to make room for different projects. I used all oem parts except for a caber ring. Cylinder did not get machine work, just porting, opened muffler up, and timing advance. Numbers that are in it are
Ex 99
Trans 127/130
Intake 80.5
Squish is .020
I did sand squish band to get proper clearance without base gasket. It does have some scuffs and scratches from normal wear. Muffler has a small crack in front around the mounting hole but still functions good. Has limited coil in it but is advanced. Compression reads 160 on my gauge but I think my gauge is wonky. I tested my 350/346, 361, and 7910 and they all came up with exact same reading. ??? But it does pull over alot harder then my other saws. $425 and I'll split shipping , paypal friends and family. Need anymore pics or questions just ask. Thanks
9c694114533539e4c8aa56c271d2b88e.jpg
c9460be978452bc421bf3a4b378fcbaf.jpg
4e753fddb122d8b96b5f9b6d7220c17d.jpg
fd6446574b6724e0d39aee4a315ad2e7.jpg
3469979a8444ae236b14feaffabfbc6b.jpg
b8790273cbdaa812112bf54edaa19cf1.jpg
 
There's some videos on you tube of it running. My username is Mike toath. Also did a build thread on it. I really do like it, but I have an 066 red light and jonsereds 820 with heated handles that I wanna get to next. So I need to move a couple.
 
How have you been. I still have that 440 sitting here tempting me to put fuel in it. I've come close a couple times. Thank you again for selling it to me.
Doing well Mike, other than the heat is a bit out of control,,, Headed up to the Finger lakes above Saratoga Springs in a few weeks for some much needed R&R,,, Can't wait!!!
GLWYS,,, I have a ported 7910,,, it is a beast of a work saw,,,

I here you on the 440, they are sweet machines for sure I run A Hybrid W/460 top end pretty regular w/20" setup. it will cut anything I need!!!!
 
I couldn't imagine the heat down there. It's been a little warm here. Have fun on your trip .

Been wanting to build a hybrid. Slowly been buying parts to build one.
 
Doing well Mike, other than the heat is a bit out of control,,, Headed up to the Finger lakes above Saratoga Springs in a few weeks for some much needed R&R,,, Can't wait!!!
GLWYS,,, I have a ported 7910,,, it is a beast of a work saw,,,

I here you on the 440, they are sweet machines for sure I run A Hybrid W/460 top end pretty regular w/20" setup. it will cut anything I need!!!!
I just left Lumberton 2 weeks ago. Wife's family is from there. I'm from Houston! Texas is in my blood but it's too dang hot!
 

Latest posts

Back
Top