Jonsered Chainsaws

[Heffalump]

Anyone ever hear of someone trying a two-ring piston in a 70E? Or fitting up the 52mm P/C from the 80? Acres has the stroke on the 80 +3mm, (38mm vs. 35mm) but that could be altered/compensated for. Perhaps a 621 crank (35mm stroke) with the 52mm P/C?

....I need a bunch of parts and some free time.....

 

[Cantdog]

Posted a bunch of pics of this project over in the "fight thread" but since I know some of you guys don't get out much, thought I'd give you all a peek at a true locomotive too. This is a 1997 saw with 10 maybe 15 hrs on it. Was sold new in a Jonsereds sawmill........interestingly it runs a 20" .325 rip chain in 0.050 with a spur sprocket.....????.....which was unbelievably dull.....I mean the back edge of the cutters are sharper than the points !!! Just a few teaser shots but if you want to see the rest of the story it's over in the "fight thread" page on 6391.......this is a really nice saw....it's not mine but sure would fit right in......though it is a little new...LOL!

 

[Heffalump]

Not sure what I love better, that 2095, or the rack-full of sexy swiss behind it!

 

[Cantdog]

Not sure what I love better, that 2095, or the rack-full of sexy swiss behind it!

Swede...not Swiss .....LOL!!

 

[Heffalump]

I could blame autocorrect....but really....I was just way too excited.....

 

[Cantdog]

Geeze.......awful quiet in here......the members gone obsolete like the saws????? NLA???? We need some NOS members.......LOL!!!

 

[Heffalump]

I got you Robin.....

Do you happen to know a good place to order the flywheel woodruff keys for the older Jreds? I think they are metric, 3mm thick, 12.5mm long, 5mm or 6mm tall?

 

[Cantdog]

Now this is a nice looking saw.......more $$$ than I would spend , but a prime example!!

http://www.ebay.com/itm/Jonsered-83...sh=item4654eb7177:g:hsoAAOSwYIxX2Fb2#shpCntId

 

[Cantdog]

I got you Robin.....

Do you happen to know a good place to order the flywheel woodruff keys for the older Jreds? I think they are metric, 3mm thick, 12.5mm long, 5mm or 6mm tall?

How many do you need??

 

[fossil]

I think all the saw specific threads all over are very slow now. The only one with any life left is the Poulan thread. Some say it's always slower in the summer.

 

[Heffalump]

3? How much each? I've been looking online and I found a few suppliers selling keys that seem to fit the description. Assuming they all adhere to the DIN6888 standards, best i can find online is $1 ish per key. But I'm not so sure they are the correct ones and I keep forgetting to call the vendors. Plus, there is a minimum order amount, so I'm looking at having to buy like, 15 plus pay shipping.

 

[WoodDean]

I'm lurking!!!!!

 

[WoodDean]

Usually in the winter months, I pull my saws onto the workbench and start the maintenance process.
It seems I have a rash of oiling leaks - the 49,52, 621 and 2050 all leave a large oil puddle under them.
I'm suspecting the Orings may need replaced.

 

[Heffalump]

My 2051 marks it's territory in this manner...

 

[Cantdog]

I'm lurking!!!!!

.........LURKER!!!!!

 

[Cantdog]

3? How much each? I've been looking online and I found a few suppliers selling keys that seem to fit the description. Assuming they all adhere to the DIN6888 standards, best i can find online is $1 ish per key. But I'm not so sure they are the correct ones and I keep forgetting to call the vendors. Plus, there is a minimum order amount, so I'm looking at having to buy like, 15 plus pay shipping.

What saws do they go to?.......likely I have a bunch.....I'll measure them tomorrow.....and let you know what I gotts......

 

[WoodDean]

My 2051 marks it's territory in this manner...

Jonsereds 111S x 2

I see what you have . . . . . . wouldn't happen to have a piston wrist pin and the spacer washers you could part with?

 

[WoodDean]

.........LURKER!!!!!

HAAAAAA . . . . . oh, AND . . . . . . I broke the pull string AGAIN on the 90.
That's like the third time. I hate when that happens.
I believe I need a heavier string, maybe 4 or 5

 

[Heffalump]

I believe it is the same key for 52, 70, 80. I have compared them and they all had the same dimensions.

 

[Heffalump]

Oh man, I wish I did. Both saws are complete runners, and I have no spare parts.

There's a pair of them for sale in the Tradin' Post....

I have a box full of random spare NOS Jreds stuff, 621/49/52/70/80 vintage. Do you know the PN of the stuff you need? If I have it I'll get it out your way.