Huztl MS660

[Kyler Monares]

whats the foil for?

how do your carbs look?

well im the one who turned out to be the lucky guy whos kit was lost. they have no idea where it is. I talked to huztl yesterday and they said they were going to track it down or send out a new one.......

im thinking about cancelling the order and going with the 360 or 361 kit since several of you have the 660

i know the 362 is the least favorite out of all stihl pro saws, same story with the 360/361 design?

 

[brandonstc6]

It's a hear shield to protect the crankcase from the muffler


Sent from my iPhone using Tapatalk

 

[blsnelling]

i know the 362 is the least favorite out of all stihl pro saws, same story with the 360/361 design?

The 361s were some of the best 60cc saws every. The 360 is highly regarded as well.

 

[Bedford T]

whats the foil for?

how do your carbs look?

well im the one who turned out to be the lucky guy whos kit was lost. they have no idea where it is. I talked to huztl yesterday and they said they were going to track it down or send out a new one.......

im thinking about cancelling the order and going with the 360 or 361 kit since several of you have the 660

i know the 362 is the least favorite out of all stihl pro saws, same story with the 360/361 design?

how did you reach them?

 

[Kyler Monares]

Sent them an email through their contact page on their website. I was suprised they got back to me so soon

 

[Bedford T]

here's the carb.

 

[Bedford T]

Sent them an email through their contact page on their website. I was suprised they got back to me so soon[/QUO

They have ignored me and BTarb24, I think he has waited days, like me.

 

[Kyler Monares]

They have ignored me and BTarb24, I think he has waited days, like me.

really? did you try their email address they have listed on ebay as well?

 

[Bedford T]

I got the cylinder cleaned up. Its smooth as a babies bottom. That was easy.

 

[Bedford T]

really? did you try their email address they have listed on ebay as well?

no i did not go through ebay because i bought it outside on their website, is the ebay contact page what you used?

 

[BTarb24]

They have ignored me and BTarb24, I think he has waited days, like me.

My order is still pending after 13 days (and has been posted on my credit card for just as long). I've used the Contact Us page and emailed them at two different email address i've found. They haven't replied to any of them. I've merely pointed out the duration of the pending state, included screenshots and order ID then asked if there's possibly anything wrong with the order. No aggressive language or anything derogatory.

I'll try their contactUs page once more. If it still doesn't yield a reply then I guess i'll have to start the paypal dispute process :/

 

[cedarshark]

Subscribed....have to keep up on the birth of a consumer grade 90 cc saw

 

[Kyler Monares]

BedfordT
I used their own website, not throgh ebay.
BTarb24, you guys ordered your kits the same day didnt you? i ordered mine on the 5th.

 

[Bedford T]

Well I can't more than I have. For some reason they just do not reply to everyone.

Anybody ever take a look at those rubber piece's I marked with paper numbers?

 

[BTarb24]

BedfordT
I used their own website, not throgh ebay.
BTarb24, you guys ordered your kits the same day didnt you? i ordered mine on the 5th.

I also ordered through their site, but on the 3rd.

I just submitted a fourthcontact attempt (2nd via their ContactUs page on the huztl site). Hopefully they reply to me this time. Otherwise I'll have to dispute via paypal and consider the gamble of making a new order. I really just want to receive the parts .. i wish they'd just mail the darn box already :/

 

[weimedog]

Subscribed....have to keep up on the birth of a consumer grade 90 cc saw

So what happens if you find this ends up being a pro grade saw at echo prices?

 

[trboxman]

Alright, here we go with the first cut on ID-ing all of the labeled screws. I'm certain that this isn't completely accurate and I won't be able to make it accurate until I get deeper into the build and actually use some of these screws, however it's probably 80% there.

Along the way I did discover how to decode the Huztl part numbers, they're remarkably logical. For example:
Huztl part number TM05200 = threaded for metal, 5mm diameter, 20.0mm long - Stihl OEM part number 9022 371 1020
Huztl part number TP06215 = threaded for plastic, 6mm diameter, 21.5mm long - Stihl OEM part number 9074 478 4475

As I mentioned earlier, searching their site for the part number will give you an OEM part number to use as a reference guide. You take the OEM part number and search the .pdf that was posted a couple of pages into this thread and you can see what sub assemblies use that screw. Some screws are used in several sub assemblies. Taking part number TP06215 as an example they are used for the Handlebar Assembly, part list #4, qty 2 and for part list #9, qty 1. In the .pdf attached to this post the sub assembly and part list number are listed in Column D "Assembly Location" as: Handlebar #4-2, #9-1.

I'll make updates as I build the saw so as to make a completely accurate guide to screw locations. For those of you also building one of these feel free to send me any discoveries that you may have as you build yours and I'll add those updates in as well.

Anyhow, I hope this is useful to others.

 

[tbohn]

New member. I been reading this forum for a year or so and decided to join after reading this thread.
I ordered a complete 660 parts set on 9/6. I did receive a receive a confirmation with an order ID the same day but I have received nothing since. I emailed them on Thursday, no response so far.

I ordered a 56mm top end and a huztl 372 complete parts set at the same time. I'm glad to see that I am not the only one that thinks buying chainsaw parts in a box from China was a good idea.

 

[Kyler Monares]

I also ordered through their site, but on the 3rd.

I just submitted a fourthcontact attempt (2nd via their ContactUs page on the huztl site). Hopefully they reply to me this time. Otherwise I'll have to dispute via paypal and consider the gamble of making a new order. I really just want to receive the parts .. i wish they'd just mail the darn box already :/

arghhhhh yep this is one of the downfalls of dealing with a company overseas!!!!!!!!

 

[Kyler Monares]

Alright, here we go with the first cut on ID-ing all of the labeled screws. I'm certain that this isn't completely accurate and I won't be able to make it accurate until I get deeper into the build and actually use some of these screws, however it's probably 80% there.

I'll make updates as I build the saw so as to make a completely accurate guide to screw locations. For those of you also building one of these feel free to send me any discoveries that you may have as you build yours and I'll add those updates in as well.

Anyhow, I hope this is useful to others.

Thank you so much for your hard work and research. You are surely making this project easier for myself and others who will build thease in the future!