Here's my Harley.
Steve
Nik's Poulan Thread
- Thread starter FATGUY
- Start date
Help Support Arborist Forum:
Here's my Harley.
Steve
blk05crew
I like 'em green
What's up everybody, just thought I'd poke my head out of all the damn snow we have here and say hello.
Enjoying the warm weather for a change. 
Steve
Steve
bassattacker
ArboristSite Lurker
I'm looking for a recoil pulley for a 3400. If anyone has one they would part with please pm me.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
bassattacker
ArboristSite Lurker
Sent from my iPhone using Tapatalk
Lots of them out there broken like that. They seem to carry on forever.
You do know you can buy them new for cheap.
Tim, i will take 20 of them if you can still get them. PM sent.
I found this $25 3400.
I look carefully at the label when they are posted for sale to see if they are a 3700 or not. I have two like that.
This one appears to be a 3800. I wonder if the top end has been changed as the rear handle is an early type.
The color on this saw is a weird yellow. I've never seen one like it. The saw is a factory repaint as there is Poulan green underneath which is not uncommon.
The decals were applied after this paint went on. It's a pale yellow. The fine print on the label indicates it's 61cc.
The 3700 AF covers are more common on the 3400's up here than the standard ones which are always seen on the rebrands.
The Canadian 3400 - 4000 saws were assembled in the Skil plant in Toronto. Most of my 3400's came with 3800 top ends and are marked 56cc.
I will get the crud out to see what I have sometime this week. Maybe tomorrow as we are expecting an ice storm.
I look carefully at the label when they are posted for sale to see if they are a 3700 or not. I have two like that.
This one appears to be a 3800. I wonder if the top end has been changed as the rear handle is an early type.
The color on this saw is a weird yellow. I've never seen one like it. The saw is a factory repaint as there is Poulan green underneath which is not uncommon.
The decals were applied after this paint went on. It's a pale yellow. The fine print on the label indicates it's 61cc.
The 3700 AF covers are more common on the 3400's up here than the standard ones which are always seen on the rebrands.
The Canadian 3400 - 4000 saws were assembled in the Skil plant in Toronto. Most of my 3400's came with 3800 top ends and are marked 56cc.
I will get the crud out to see what I have sometime this week. Maybe tomorrow as we are expecting an ice storm.
Here's my Harley.
Steve
I like sportsters. have had 3, 2 ironhead '73 & 4, 1 alum '97.
Boomer 87
Addicted to ArboristSite
Sweet. Dad had a 72' sporty 1000 4 speed he had overbored, S&S intake and carb, an Andrews camshaft. He had to put a big sproket on the back to get the RPMs up otherwise the cam made it lope to hard trying to cruise through town. Said it took down a kawasaki 1000 back in the day.
i love my 3400 sereis saws, will put them up against any saw in that cc range, they are bulletproof and have tons of torque for a 56 cc saw, used one for 3 hours Sunday and filled two trucks with it,
Boomer 87
Addicted to ArboristSite
I really like them too. My favorites are the farm pro 375s
old pic the 3700 on the end is done and running too
brandonstc6
Addicted to ArboristSite
Who welded that up for you? I have a stihl 066 cylinder with a broken off muffler bolt and the edge of the hole is broken off. I had my dad tig weld on some junk cylinders and they just burnt up instead of taking a weld.
Sent from my iPhone using Tapatalk
redunshee
Addicted to ArboristSite
I'll find out when I drill and tap it next week.
Here's my Harley.
Steve
Sent from my SM-G935V using Tapatalk
they can be made very quick. was 8 sec 1/4mi, out of local shop here. fyi they have 4 cams.
not clean or no/wrong gas or machine settings.
bassattacker
ArboristSite Lurker
I've been looking for new and cheap but apparently not looking in the right spot.
Sent from my iPhone using Tapatalk
brandonstc6
Addicted to ArboristSite
Taking a look see at some of the 54cc 60cc 65cc 83cc stuff I been setting on the bench #1.
Similar threads
