Porting

[m1sawguy]

I have my grand dads old 10-10 mac with 16"bar I want to have it ported and piped with nitrous inj. so it runs gooder.Who should I have do the job I know there is a few on here but idk nothing about them.I cut about 100 face cord per weekend so its gotta be a good fast saw!!

 

[CR888]

Fabz...he's a bit hard to find but his secret porting coupled with his razor chain he says makes a formidable saw. Super fast cutty cutty.

 

[happysaws]

I have my grand dads old 10-10 mac with 16"bar I want to have it ported and piped with nitrous inj. so it runs gooder.Who should I have do the job I know there is a few on here but idk nothing about them.I cut about 100 face cord per weekend so its gotta be a good fast saw!!

Doesn't a stock 10-10 run good enough?

 

[Sepia]

I have my grand dads old 10-10 mac with 16"bar I want to have it ported and piped with nitrous inj. so it runs gooder.Who should I have do the job I know there is a few on here but idk nothing about them.I cut about 100 face cord per weekend so its gotta be a good fast saw!!

While those mods you quoted will certain make your saw awake, if you really want that 16' blade to chop wood fast, you will have to install a 6-71 blower - and that's gonna cost ya.

PM me for details.

 

[pioneerguy600]

Only one guy baaad enough for that job, "PILTZ"..!

 

[Chainsaw Jim]

I have my grand dads old 10-10 mac with 16"bar I want to have it ported and piped with nitrous inj. so it runs gooder.Who should I have do the job I know there is a few on here but idk nothing about them.I cut about 100 face cord per weekend so its gotta be a good fast saw!!

Wouldn't you be better off to just go back to the mall and hang out?

 

[svk]

subscribed

 

[svk]

 

[Sepia]

So how is the weather in Maine, svk?

 

[svk]

So how is the weather in Maine, svk?

Minnesota you mean? Beautiful. 82 today and 86 tomorrow.

 

[Sepia]

OOPS being a canuck has it's disadvantages at times. We are cool here today and the rain can't seem to stop for more than a day.

Jeez... you live in Northern MN and no ported saws in your sig... how can that be?

edit: I see you have a mms saw in there so all is good

 

[Kel71]

Just replace the p/c with a 33-68 p/c kit from that guy in Japan. It's a direct bolt on.
The guy's last name is , well it's really hard to spell. Everyone just calls him Iri.
The correct p/c kit will have 8 turbulence generators cut in to the piston crown
like this.

 

[svk]

OOPS being a canuck has it's disadvantages at times. We are cool here today and the rain can't seem to stop for more than a day.

Jeez... you live in Northern MN and no ported saws in your sig... how can that be?

I have a Miller Mod 550 in my sig and my avatar, doesn't that count?

 

[Sepia]

I have a Miller Mod 550 in my sig and my avatar, doesn't that count?

It sure does! I edited my post a few seconds after I put it up there lol

 

[Sepia]

Just replace the p/c with a 33-68 p/c kit from that guy in Japan. It's a direct bolt on.
The guy's last name is , well it's really hard to spell. Everyone just calls him Iri.
The correct p/c kit will have 8 turbulence generators cut in to the piston crown
like this. View attachment 582716

Kel71, I am concerned about all that turbulence. It may create an air pocket and cause the saw to drop right out of the operators hands. However, I think my 6-71 blower mod could smooth some of that turbulence for a win-win type situation. Just a theory at this point, but worthy of investigation by the OP (it's gonna cost him... more!)

 

[svk]

It sure does! I edited my post a few seconds after I put it up there lol

I'll have more ported saws eventually, just trying to get the right saws first.

I have a 345 to convert to 346 and a 65 to 77 here soon. Then for my birthday I'm thinking I want to dabble a bit more in the modern 70 cc field.

 

[Kel71]

Not to worry CJ the muffler unturbulences it.

 

[Sepia]

Not to worry CJ the muffler unturbulences it.

I prefer to call it "unturbulizing", but every porter has their own modding vocabularee

 

[svk]

Maybe do some covfefe ports too.

 

[Sepia]

ha ha ha