Black Cat Performance meets the 462c

[Frank Rizzo]

It's not a single inlet either.

Have you ever taken a 462 apart?

It’s not ? That’s from Mr Snelling’s thread .... This is my 241c notice the inlet on both saws as opposed to this 261cbottom feeding quad-transfers ...just like the 441cm I’ve just about finished... maybe I’m using different terminology than use guys do ...

 

[Deleted member 135597]

It’s not ? View attachment 714173That’s from Mr Snelling’s thread .... This is my 241c View attachment 714174notice the inlet on both saws as opposed to this 261cView attachment 714175bottom feeding quad-transfers ...

Why u posting pics of brad cylinder when yours is right there?

 

[Deleted member 135597]

It’s not ? View attachment 714173That’s from Mr Snelling’s thread .... This is my 241c View attachment 714174notice the inlet on both saws as opposed to this 261cView attachment 714175bottom feeding quad-transfers ...View attachment 714176just like the 441cm I’ve just about finished... maybe I’m using different terminology than use guys do ...

I just want to confirm that jack ported your 241c correct?

 

[Mastermind Worksaws]

It’s not ? View attachment 714173That’s from Mr Snelling’s thread .... This is my 241c View attachment 714174notice the inlet on both saws as opposed to this 261cView attachment 714175bottom feeding quad-transfers ...View attachment 714176just like the 441cm I’ve just about finished... maybe I’m using different terminology than use guys do ...

Frank......the entrance to the transfers on the MS462 is in the bottom of the case. If you would have actually had one apart in front of you.....you would know that.

You really should sit down and shut the **** up now.

 

[stihl sawing]

Here comes another excuse.

 

[stihl sawing]

what happened to the tree job francis?

 

[Mastermind Worksaws]

WooT WooT

 

[Deleted member 135597]

@Frank Rizzo i just emailed jack again because I still have not received a response. I included a link to this thread, maybe he will chime in and support your build thread with his expertise.

 

[stihl sawing]

@Frank Rizzo i just emailed jack again because I still have not received a response. I included a link to this thread, maybe he will chime in and support your build thread with his expertise.

Oh boy, this might get good.

 

[Deleted member 135597]

It appears another **** front has rolled thru! You boys still playin with this fella huh?

 

[Frank Rizzo]

Frank......the entrance to the transfers on the MS462 is in the bottom of the case. If you would have actually had one apart in front of you.....you would know that.

You really should sit down and shut the **** up now.

Thanks for your assessment of the situation - I’m referring to the jug proper not the case ... have a nice day !

 

[Deleted member 135597]

Oh boy, this might get good.

Please explain

 

[Mike Hunterts]

Thanks for your assessment of the situation - I’m referring to the jug proper not the case ... have a nice day !

These quotes may apply here:

No , your attempts are weak bozo - everyone sees right thru ya

Probably misinterpreted the statement and now are twisting words to suit your agenda

History repeating itself. Meltdown imminent. anna 1, anna 2, anna...

 

[Mastermind Worksaws]

Thanks for your assessment of the situation - I’m referring to the jug proper not the case ... have a nice day !

Yeah......sure.

 

[Westboastfaller]

Poor guy has to use "Hot" woods ported to try to make people think he is the real deal. Any other builder is fine w/ just a "Woods Ported" saw. But a certain wanna be builder w/ no skill, intelligence, self esteem must try to 1 up others by adding decisive titles to well known phrase's like "Woods Ported".

Carl Miller called it a 'loggers build' a few yrs ago.
I have used the term a few time.
To be more accurate. A fallers build.

I never heard that until Kevin said it the other day. He said he just builds works saws. Who know? I thought I ran work saws. Its all good.
But if someone says "full skip" I will drive a hot poker through my eyeball.

I am begging you guys. Please please pretty please don't say that. Please?

Did I say please.

 

[Deleted member 135597]

Carl Miller called it a 'loggers build' a few yrs ago.
I have used the term a few time.
To be more accurate. A fallers build.

I never heard that until Kevin said it the other day. He said he just builds works saws. Who know? I thought I ran work saws. Its all good.
But if someone says "full skip" I will drive a hot poker through my eyeball.

I am begging you guys. Please please pretty please don't say that. Please?

Did I say please.

Full skip full skip full skip hahahaha, just hackin on ya is all

 

[Mastermind Worksaws]

I once knew a girl everyone called Full Skip.

 

[Deleted member 135597]

History repeating itself. Meltdown imminent. anna 1, anna 2, anna...

I’m concerned about this, Frank doesn’t seem himself to me, is anyone else concerned? Frank, I’m willing to talk with you, there’s a lot of negativity in this thread. Please consider

 

[Mastermind Worksaws]

I once knew a girl everyone called Full Skip.

Most fellers Skipped it.......but I though she was Full of fun.

 

[Mastermind Worksaws]

I’m concerned about this, Frank doesn’t seem himself to me, is anyone else concerned? Frank, I’m willing to talk with you, there’s a lot of negativity in this thread. Please consider

Frank needs a professional......can you please post some photos of your credentials?