Yeah, the one guy that wanted it decided to pass once he saw the piston so I’m thinking it might become a back burner project.
McCulloch Chain Saws
- Thread starter Bruce Hopf
- Start date
Help Support Arborist Forum:
Pistons are basically non-existent for it. Not worth much without one and who knows what the rest of the innards are like.
Parts saw..., or conversion to a conventional 82cc PM shortblock.
But now you can say you have one!
Parts saw..., or conversion to a conventional 82cc PM shortblock.
But now you can say you have one!
emf123
ArboristSite Operative
- Joined
- Mar 27, 2014
- Messages
- 167
Those are a rare bird. If you want to sell it, I'm sure a few people would be interested.
Rob - put me high on the list of those interested in the 49
Dan - I have a used piston from a PM8200 if you should decide to pursue that project.
Mark
Dan - I have a used piston from a PM8200 if you should decide to pursue that project.
Mark
I feel sick. I asked the guy that had the 8200 if he had the bottom brace laying around and he responded that he threw it and the full wrap attached to it into the dump last week along with a bunch of Eager Beavers. No, I'm not joking.
In other news, I cleaned up my other two Macs.
Sent you a pm about the 8200 saw. Thanks
Bob Johnson has the full wrap handles for $30 + $15 shipping.I don't know about the bottom handle brace though.
Vinny,are you gonna make another Frankensaw?Lol
Camperspecial
ArboristSite Member
Picked up an interesting saw today.
3-25 two button.
Seems complete except for fuel lines.
I think in the end Mcculloch gave up on the second button and went with a Petcock instead, which this has.
Additional info welcome and appreciated.
3-25 two button.
Seems complete except for fuel lines.
I think in the end Mcculloch gave up on the second button and went with a Petcock instead, which this has.
Additional info welcome and appreciated.
You are missing a chrome "grille" over the flywheel. A buddy has one that his father-in-law won as a prize at a forestry meeting because he had memorized the current (1951) logging safety manual. It was too much saw for the tree farm it lived at so it is relatively unused, and it still has all the original manuals. He won't get rid of it, sadly.
Will a PM555 recoil work on a SP60? My SP60 recoil is actually off of a 8200 and chainsawr has a PM555 recoil assy in stock, and while it looks like they would interchange I wanna check with you guys first.
Never mind, I pulled the recoil off of mine and noticed it utilizes most of the mounting positions, so I'm guessing it's actually correct.
Ha haaaa. Ya never know
Just the recoil yes. The housing may work but its not correct
Do you know if this is the correct housing? https://www.ebay.com/itm/153310519416?hash=item23b204e078:g:e-cAAOSwwjRcGt5e
Dan - Most LH start housings will work except for the PM805 and later. The SP models have an extra hole or two but you can add them easily enough. 600002 is a 10-10A and can be made to work.
Rob - the "grill" in the 3-25 is attached to the flywheel and rotates, you have to be careful if you rest the saw against your leg as the rotating grill will rub a hole in your chaps or your jeans. Although I am running Hoss's big Homelite in this photo, the hole in the left leg of my chaps came from the cheese grater on Hoss's McCulloch 73.
The culprit.
Mark
Rob - the "grill" in the 3-25 is attached to the flywheel and rotates, you have to be careful if you rest the saw against your leg as the rotating grill will rub a hole in your chaps or your jeans. Although I am running Hoss's big Homelite in this photo, the hole in the left leg of my chaps came from the cheese grater on Hoss's McCulloch 73.
The culprit.
Mark
As stated, yes that will work.
I've just about lost it with the DE80.I put the new recoil spring in today & it works great till I put the recoil on the saw.When I begin to tighten the screwes (it doesn't matter which ones,there are 3 long & 4 short torx head) the recoil binds up & the rope won't retract.I've gone through the entire recoil - pawls,springs,pulley,etc.,& it doesn't matter what I do.I've come to the conclusion that the shaft in the recoil is bent.
Similar threads
Want to Buy
McCulloch Super 250
