see post #1938 above. homemade evaporust.
they don't. just being a wienie.I didn't think 925's had decompression- 923 did- but 25 didn't?
Have you cut with it yet?is there a hidden compression release on this thing? what a bear to start. the compression is insane.
View attachment 1135623
not yet.Have you cut with it yet?
I have the 77cc version that had a check valve on the carb that caused it to be too rich no matter how far the high jet was turned in. I soldered that shut & it’s a good running saw. I think you will like it.not yet.
I have one just like it on the bench beside me- but off a Stihl 023- but I think you win for the worse condition stakes.Fellow brought in a Husqvarna 350 today, he thought he was missing the bar adjust screw because the chain jumped and then wouldn't move. Turns out the adjuster was fine (he didn't know where to look) but the bar, chain, and sprocket were all well spent.
View attachment 1135721
Mark
I watched a video by Leon the other day where he was fixing a guys 925. he mentioned that some guys block off the check valve and said he doesn't recommend it. YMMV. I'm going to leave it.I have the 77cc version that had a check valve on the carb that caused it to be too rich no matter how far the high jet was turned in. I soldered that shut & it’s a good running saw. I think you will like it.
Very nice. I think we both have the same dust extractor.got the old Parker vise degreased, wire brushed, removed the last vestiges of original paint and into the tub of homemade evaporust.
View attachment 1135489View attachment 1135490View attachment 1135491
Enter your email address to join: