015 help

[whl3]

I need to re assemble my 015L after cleaning the carb. However, I can't seem to put the cover back on. The trigger is attached and prevents the cover from engage. Any suggestion would be wonderful.

 

[Poleman]

You may need to slightly move the trigger to fit the case half. Also make sure your on/off switch is pushed forward out of the way.

 

[whl3]

Thank you Rich. I have tried to move the trigger to the point I though I might break it. However, I’ve ruled everything else out. There are some good utube presentations on the 015 and each one shows putting the case on with no trouble. I’ll let you know if I get lucky.