064 / 066 / MS660 18 flywheels, 7 coils

[singinwoodwackr]

Makes me not want to ever rebuild my ‘92 Red-eye, lol

 

[Paul R 01]

After reading through 20 odd pages of threads and going over a bunch of tech notes and IPLs I put this together hopefully it is helpful to somebody. The many fine folks here were invaluable in helping me understand as much of this as I can absorb so far
Pictures at the bottom of the post and corrections/additions welcome.

Thanks to Jacob J for the tons of good info on this topic.

Also attached is some interesting 064/066 documentation in a PDF that I hadn't seen here before.

064 / 066 / MS640 / MS650 / MS660 Ignition Systems V1.0 6.25.15

Earliest illustrated parts list noted where known.


Flywheels – aluminum with single keyway unless noted.

1122 400 1201A – 064 for use with Bosch ignition, unlimited coils

1122 400 1202 – 066W, MS660 for generator

1122 400 1203 - 064, 064R for use with limited coils 1303 [92.12ipl]

1122 400 1203 (double keyway) - 064, 064R for use with limited or unlimited coils

1122 400 1203/1204 - marked with both but only one keyway, normally limited

1122 400 1204 (single keyway) – 064 for use with limited coils ONLY

1122 400 1204 (double keyway) – 064

1122 400 1206 – 064 for generator 3500 [87.1ipl]

1122 400 1207 - 064W for generator 4000 [92.12ipl] and generator 3500 [95.01ipl]

1122 400 1209 - 066

1122 400 1209/1214 - 066 marked with both but only one keyway

1122 400 1209/1214 – 066 double keyway

1122 400 1214 - 066, 066M with larger big end bearing from early 1995 [95.01ipl]

1122 400 1215 – 066 redeye

1122 400 1216 - 066W heated handles [95.01ipl]

1122 400 1217P – 066 pre 1996 poly

1122 400 1217 – MS650, MS660

1122 400 1218 – 066W, MS660 heated handles


Generators

1118 400 4000 – 064W [92.12ipl]

1122 400 3500 – 064W [87.1ipl], 066W [95.01ipl]

1122 400 3501 – 066W, MS660

1122 400 3502 – 066W, MS660


Ignition Coils

0000 400 1300 – 066 unlimited “short” mount

1122 400 1300 – 064, MS640 unlimited, “dogleg” mount, works with generator 3500 [87.1ipl]

1122 400 1303 – 064 CDIC limited Prufex [92.12ipl]

1122 400 1307 – 066 CDIC-A limited including 066 red eye model

1122 400 1311 – 064/066 unlimited, easier starting, short life span [95.01ipl]

1122 400 1312 - 066 poly flywheel three screw mount

1122 400 1314 – 066, MS650, MS660 two screw mount


Trigger Units

No number shown - 064 September 1987 to mar 3rd 1991 [92.12ipl]

There are at least two version of the 064 crankcase with different mounting holes for the ignition coils.

QUESTION - I have a flywheel 1203/1204 with a single keyway, when I line up the magnets with a dual keyway 1203 flywheel the single keyway lines up with the 1:00 keyway rather than the 12:00 keyway when viewed from the outboard side. So is this a limited or unlimited flywheel??

Thanks
Dave

44.86 is instructions for stocking parts for the new 064 models
43.86 is an introduction to the new 064 models with all the technical specs, etc.

Thank you so much Dave! I had already listed my 064 for parts on EBAY out of frustration when I came across your excellent work. I had boxes of 066 parts so I replaced my flywheel, mounted an aftermarket unlimited coil, changed to a 066 recoil cover and started the saw!

 

[Vintage Engine Repairs]

Finished the first one - the square top 066

 

[Dennisthemenace]

Finished the first one - the square top 066

View attachment 1134735

View attachment 1134739

Very nice

 

[250R]

For sale?

 

[Lightning Performance]

For sale?

Yeah, let's get two sent over.
Cash or PayPal is the question.
They look nice and fresh.
The sticker shock should kill us

 

[250R]

Aussie shipping is always the deal breaker. $$$$

 

[Vintage Engine Repairs]

For sale?

Yeah eventually when I get bored of seeing it on the shelf!

 

[huskihl]

Finished the first one - the square top 066

View attachment 1134735

View attachment 1134739

Otherwise known as a flat top. Just so you don’t get laughed at next time you call it that lol

 

[Dennisthemenace]

Otherwise known as a flat top. Just so you don’t get laughed at next time you call it that lol

But unfortunately I don't think it is what is known, over here anyway, as a "tin back" (very early model) or I'd make Tom an offer and keep it here in Oz.

 

[Vintage Engine Repairs]

Otherwise known as a flat top. Just so you don’t get laughed at next time you call it that lol

Haha thanks mate!

 

[huskihl]

But unfortunately I don't think it is what is known, over here anyway, as a "tin back" (very early model) or I'd make Tom an offer and keep it here in Oz.

Tin back is probably more referring to the 064 with the metal air filter cover. This one is plastic. Not 100% certain but I don’t know if the 066 came with the metal air filter cover

 

[RedneckChainsawRepair]

This was at a local pawn shop years back. What you refer to tin back? Was even a arctic.

 

[singinwoodwackr]

Otherwise known as a flat top. Just so you don’t get laughed at next time you call it that lol

Nah…a real flat top doesn’t have a decomp

 

[Bob Hedgecutter]

Nah…a real flat top doesn’t have a decomp

Agreed- the decomp puts it in that last variation 1996-98 before the humpbacks arrived.

 

[Dennisthemenace]

Agreed- the decomp puts it in that last variation 1996-98 before the humpbacks arrived.

064 /066 threads are just about my favourite. Well done Tom for giving it a bump

 

[bulletpruf]

Can you use a 1122 400 1209/1214 – 066 double keyway flywheel on an 064?

Thanks