chiseltooth
ArboristSite Lurker
Hi all, bit of advice needed here.
this 064 i got started fine but kept dieing. fiddled with the high lows and now it idles, but runs away with itself when i press the throttle. when i release the throttle it takes an age to slow down.
the hi screw is turned full in clockwise and backed off about half turn, while the low is about 2 1/2 turns backed off. i dont have a manual, but on my litlle 254xp it didnt take long to suss out the right settings by feel.
can anyone take me thru set up with some good instructions.
really appreciated.
this 064 i got started fine but kept dieing. fiddled with the high lows and now it idles, but runs away with itself when i press the throttle. when i release the throttle it takes an age to slow down.
the hi screw is turned full in clockwise and backed off about half turn, while the low is about 2 1/2 turns backed off. i dont have a manual, but on my litlle 254xp it didnt take long to suss out the right settings by feel.
can anyone take me thru set up with some good instructions.
really appreciated.