Want to Sell 1/2" chain master links

[nstueve]

I'd be interested in some 1/4" pitch links!

Philbert

how many? send me a PM with addy and they are yours for the asking. Still owe you for the saw pick up!

 

[Bill G]

What does the Mercury run? 1/2"..............................

The majority of the DA211 saws run 9/16 but some have 3/4 gears. The Kb7 series all run 3/4 as far as I have ever seen

McCulloch 2 man can have everything 9/16,5/8, and 3/4

 

[psuiewalsh]

I still have what I think are 1/2 and .404 links. Baileys says Oregon P23825 Tie Straps (25 Pack) for 16/27/59 Series Chainsaw Chain - but they do not fit the 23883 links. the 23859 (1/2?) and the 23883 do not show up as current part numbers.

 

[Bill G]

Those do not look like 1/2"

 

[psuiewalsh]

Bill do you still have your old Oregon books to see what the numbers are? They are much larger than .404. The 23859 measure almost .50 center to center.

 

[Bill G]

Bill do you still have your old Oregon books to see what the numbers are? They are much larger than .404. The 23859 measure almost .50 center to center.

Yes I have many of the Oregon catalogs but if they are not Oregon links that will not do any good

 

[Bill G]

Ok now my thick head just read you said they were Oregon links My mistake.............. so let me take a look in the book

 

[Bill G]

Ok well I am mistaken the 23859 is the preset for 1/2" .058 and .063

Bill

 

[psuiewalsh]

Thanks. Still not sure what the other is.

Sent from my C771 using Tapatalk 2

 

[Bill G]

Which other are you asking about?

 

[psuiewalsh]

23883 links

Sent from my C771 using Tapatalk 2

 

[Philbert]

23883 links

That's a lot of links!

Philbert

 

[Bill G]

23883 links

Sent from my C771 using Tapatalk 2

I believe they are .404

 

[xtremez]

Are the 1/4 presets for STIHL chain?

 

[67L36Driver]

I have a length of 9/16" X .063" X 66 dl. And, enuff rivits, side plates, drivers and cutters to make a loop.

Trade for 7/16" X .058" length or loop.

 

[andyb]

any 9/16 left?

 

[singinwoodwackr]

any 9/16 left?

Uh, 2015…

 

[Bill G]

Nice old thread...... If you get in a real pinch I might be able to find a couple.

 

[andyb]

eh worth a shot lol. working on a mall 12a and as you all know the chains are getting hard to find... had a broken one i was trying to repair.

 

[Philbert]

There were 2 different sizes of Oregon 1/2” pitch chains. They are not compatible with each other (!).

Info is in other threads here on A.S.

Philbert