150t c-e bar

[dogdad]

Not having a 150 t saw,,,I'm guessing the 12" pole saw bar will not work on the 150t?

 

[sawfun]

The 150 is 1/4 pitch chain I believe. Most 3005 polesaw bars are 3/8 lo pro/picco. So likely your 12" bar will not work, however, there is a homeowner Stihl polesaw that uses the 10" 1/4 pitch chain that would work.

 

[Duane(Pa)]

A bar without a sprocket nose will work with any pitch. Match the gauge and a saw wood!

 

[Fire8]

I wish they would come out with 16 bar 1/4

 

[Stihl 041S]

I wish they would come out with 16 bar 1/4

Maybe another brand modified.
Or as Duane said. Go hardnose.

 

[xtremez]

16 is available. I just ordered this a few months ago

 

[Franny K]

I wish they would come out with 16 bar 1/4

Who do you mean by they? I wanted a Stihl 1/4" pitch sprocket nose bar and was offered out of their paper catalog I think three sizes in both 0.043 and 0.050 but just eight tooth noses. I think Stihl has 13 tooth noses in 1/4x0.050 but got close enough elsewhere. My question is what are the sizes they have available in 1/4 x 0.043? (1.1mm)

I sort of recall reading about someone getting a sprocket to run the 3/8 picco and essentially pole saw bar and chain.

Looks like the Lithium Ion battery pole saws use 1/4 pm3 chain and they call those professional. 10 and 12 inch. (1/4" called length can be worst exaggeration) Looks like 1/4 pm3 is the 0.043 stuff.

 

[Duane(Pa)]

View attachment 467491 16 is available. I just ordered this a few months ago

I have that rig on my 200 rear handle. Love it!

 

[xtremez]

I love it. I use those on my 201T also