This bar seems to be around a 15" 64 dl .325 .050.
From my limited experience, I would say this bar is more of a universal bar than a made for husqvarna bar. The oiler and the tensioner holes line up, but it looks like the bar would fit more than one make.
I determined the drive link count by comparing it to a 16" laminated husqvarna bar with a 66dl chain as reference.
Both bars were mounted on the bar studs in roughly the same position relative to the chain tensioner whole.
Everything was flush and tight on the husqvarna bar, with the chain, but there was slack in the total bar. The slack seemed to be about 2 drive links. Therefore, this bar is mountable on small mount husq frame with a 64dl .325 chain, .050 gauge. Im calling it 15."
Heres a pic with both bars lined up with a 16" jonsered bar, with reference to the butt end. The bar for sale is in the middle.
Strangely, the jonsered seems to do fine on either small mount or large mount frame, but just an observation that seemed worthy of mention. The 15" bar was only2.5 ounces heavier than the 16" husqvarna small mount laminated bar.
I can say for sure the pics show a 16" small mount husq bar and 66dl chain.Im not really sure if any of the other data is valid or not, just my own observations. And of course the bar is for sale.
but dont want to really budge much off the $48 price tag.
Thank you!