ccronin
ArboristSite Operative
So I need to thin out my collection and here are 3 pretty good saws. The 044s have new Caber rings, seals, fuel and impulse lines and rebuilt carbs. The engines are all OEM and pass all pressure tests and run great. They both start easily and you can see by the compression that they are tight. The clutch covers are aftermarket replacement but I can put the dirty OEM back on if you prefer. The bars and chains are used but good. I would like to get 450.00 each or 425.00 PHO plus actual shipping.
The Husky 357xp is very strong and all OEM. The carb is a new Zama, new Caber ring, metal intake clamp and fuel line and the saw starts on the 2nd or 3rd pull. The bar and chain are almost new. I would like to get 425.00 or 375.00 PHO plus actual shipping.
The Husky 357xp is very strong and all OEM. The carb is a new Zama, new Caber ring, metal intake clamp and fuel line and the saw starts on the 2nd or 3rd pull. The bar and chain are almost new. I would like to get 425.00 or 375.00 PHO plus actual shipping.
Attachments
-
IMG_0968.JPG52.4 KB · Views: 460
-
IMG_0970.JPG76.5 KB · Views: 517
-
IMG_0971.JPG41.3 KB · Views: 489
-
IMG_0972.JPG52.2 KB · Views: 468
-
IMG_0973.JPG49.1 KB · Views: 469
-
IMG_0975.JPG52.2 KB · Views: 466
-
IMG_0979.JPG36.1 KB · Views: 486
-
IMG_0980.JPG57.7 KB · Views: 482
-
IMG_0981.JPG46.6 KB · Views: 479
-
IMG_0982.JPG52 KB · Views: 416