morbius18
ArboristSite Operative
I bought the 346 from ebay thinking it was a ne because it had the primer , top cover said 50cc and gray clutch cover.
After getting it and breaking it down for rebuild I discovered a few things off. The primer bulb (ne) wasnt hooked to anything. The carb didn't have a return line for it (oe), nor did the tank have a return (oe) The carb has the smaller flange (ne) without the long arm for the adjusting holes. The model plate says 2011 which would be ne.
The cylinder I need help with. What is this? This is my second Husqvarna rebuild, but I've done 50+ Stihls. I'm not experienced enough with Huskys yet.
The cylinder and piston are 44mm. It will need a new piston and ring and the cylinder is slightly scored and will need a little cleanup.
After getting it and breaking it down for rebuild I discovered a few things off. The primer bulb (ne) wasnt hooked to anything. The carb didn't have a return line for it (oe), nor did the tank have a return (oe) The carb has the smaller flange (ne) without the long arm for the adjusting holes. The model plate says 2011 which would be ne.
The cylinder I need help with. What is this? This is my second Husqvarna rebuild, but I've done 50+ Stihls. I'm not experienced enough with Huskys yet.
The cylinder and piston are 44mm. It will need a new piston and ring and the cylinder is slightly scored and will need a little cleanup.