372 Clutch - Oiler installation help

[Ptarmigan]

Hi Everyone,

I'm putting my 372 back together and I have a question about the reassembly that I haven't seen in a post and the manual hasn't clarified for me. I'm reassembling the clutch side and it's the order of the bushing, washer, oiler drive gear, and clutch. I do have the small o ring on the crankshaft.

Is the order that things install:

1 o ring slides over crankshaft.
2 push bushing onto crankshaft with thick part engaging the seal.
3 slide washer onto bushing
4 slide oil pump drive gear onto bushing
5 tighten clutch onto crankshaft - how tight do you put this on

or is it

1 o ring slides over crankshaft.
2 push bushing onto crankshaft with thick part engaging the seal.
3 slide oil pump drive gear onto bushing
4 slide washer onto bushing
5 tighten clutch onto crankshaft

I guess what I really want to know is where does the washer go and how tight should the clutch be.

Sean

 

[SWE#Kipp]

pm me your email and i'll send the workshop manual for the saw !