stevetheboatguy
ArboristSite Guru
Kinda hoping that someone has a saw that has blown up bad and wants to sell it. I have a 372 that has a perfect case, crank and cylinder. I would like to build it if possible. Not looking for pretty parts, serviceable is all I am looking for. The pictures are of the saw carcass I have. Obviously it isn't pretty, but it was a very low use saw. Most of the grunge on it is from around the shop that had it.
The story I got with it was. They couldn't get it to run correctly ever since it was new. They ended up using it for a parts donor to keep their other 365-372's in use.
I pulled the cylinder and found the base gasket sucked in and the piston was scored. Hopefully a new piston and the other parts replaced and I will have another go to firewood saw.
If anyone has anything or everything that I may need please let me know.
Thank you.
Steven
The story I got with it was. They couldn't get it to run correctly ever since it was new. They ended up using it for a parts donor to keep their other 365-372's in use.
I pulled the cylinder and found the base gasket sucked in and the piston was scored. Hopefully a new piston and the other parts replaced and I will have another go to firewood saw.
If anyone has anything or everything that I may need please let me know.
Thank you.
Steven