372xp Bar size ?
- Thread starter nickg
- Start date
Help Support Arborist Forum:
stevethekiwi
Addicted to ArboristSite
AUSSIE1
Al.
AUSSIE1
Al.
Hey Steve I ran a 24" on the 371XP for 9 years and a 20" for the last.
Heck took 9 to figure it out.
Al.
stevethekiwi
Addicted to ArboristSite
a. 372 20" = im soft
b. 372 20" = im scared
c. 372 20" = i wants bigger trees but cant find them so i shoulda got a 357
d. 372 20" = i wants a 372 so i looks like a logger, but i is not a logger
e. 372 20" = i shoulda bought a 357 now that those gosh darn fuel prices are so high
f. 372 20" = i is too tight for a 24" bar.
g. 372 20" = I is only doing firewood and I is havin all the time in the world to make 2 cuts per round
h. 372 20" = my dealer told me this was what i needed. but he is a good dealer.
i. 372 20" = trees dont grow that big here anyway, but I really needed all that power to cut down these vines to keep the local tooth pic factory in business
j. I think that balance is when the saw is in a cut and the motor is so heavy in comparison that the bar is always wanting to sit up and say "hi"
k. the saw is "home use only." I had a guy come and cut down a tree for me, he was using a 372.
Pick one.
Nah just kidding ya'll. It may be different elsewhere, but I can tell ya right now that in NZ 80% of 372's in nz are running 22" or 24"
Not taking the pi$$ PGG, im sure your 20" works great
b. 372 20" = im scared
c. 372 20" = i wants bigger trees but cant find them so i shoulda got a 357
d. 372 20" = i wants a 372 so i looks like a logger, but i is not a logger
e. 372 20" = i shoulda bought a 357 now that those gosh darn fuel prices are so high
f. 372 20" = i is too tight for a 24" bar.
g. 372 20" = I is only doing firewood and I is havin all the time in the world to make 2 cuts per round
h. 372 20" = my dealer told me this was what i needed. but he is a good dealer.
i. 372 20" = trees dont grow that big here anyway, but I really needed all that power to cut down these vines to keep the local tooth pic factory in business
j. I think that balance is when the saw is in a cut and the motor is so heavy in comparison that the bar is always wanting to sit up and say "hi"
k. the saw is "home use only." I had a guy come and cut down a tree for me, he was using a 372.
Pick one.
Nah just kidding ya'll. It may be different elsewhere, but I can tell ya right now that in NZ 80% of 372's in nz are running 22" or 24"
Not taking the pi$$ PGG, im sure your 20" works great
stevethekiwi
Addicted to ArboristSite
ran out of wood? lol... you are one of the few downunder. you should race that puppy with a 20" on it
MCW
Somebody's talking crap here & it ain't the tree!
a. 372 20" = im soft
b. 372 20" = im scared
c. 372 20" = i wants bigger trees but cant find them so i shoulda got a 357
d. 372 20" = i wants a 372 so i looks like a logger, but i is not a logger
e. 372 20" = i shoulda bought a 357 now that those gosh darn fuel prices are so high
f. 372 20" = i is too tight for a 24" bar.
g. 372 20" = I is only doing firewood and I is havin all the time in the world to make 2 cuts per round
h. 372 20" = my dealer told me this was what i needed. but he is a good dealer.
i. 372 20" = trees dont grow that big here anyway, but I really needed all that power to cut down these vines to keep the local tooth pic factory in business
j. I think that balance is when the saw is in a cut and the motor is so heavy in comparison that the bar is always wanting to sit up and say "hi"
k. the saw is "home use only." I had a guy come and cut down a tree for me, he was using a 372.
Pick one.
Nah just kidding ya'll. It may be different elsewhere, but I can tell ya right now that in NZ 80% of 372's in nz are running 22" or 24"
Not taking the pi$$ PGG, im sure your 20" works great
Heh heh. Thats funny stuff. Maybe just New Zealanders and Aussies would understand it...
Sadly though its possibly based on fact
All the 372's I've seen have had 24" bars.
Last edited:
AUSSIE1
Al.
ran out of wood? lol... you are one of the few downunder. you should race that puppy with a 20" on it
Nope and yep!
Al.
SawTroll
Information Collector
Heh heh. Thats funny stuff. Maybe just New Zealanders and Aussies would understand it...
Sadly though its possibly based on fact
All the 372's I've seen have had 24" bars.
Most of the few I have seen here (Norway and Sweden) has an 18" bar on them...........
......but then the MS660 is sold with a 15" bar here.....:monkey: :monkey:
stevethekiwi
Addicted to ArboristSite
stevethekiwi
Addicted to ArboristSite
Hi Niko!!!
660 with a 15"??? now that insane.....
You guys must have some keen fellers
Marc
Addicted to ArboristSite
Haywood touched on what I wanted to say, but I'll repeat it anyway, for ####es and giggles...
It really does depend a lot on the wood you cut. Yes a smaller bar is cheaper and the chain has fewer cutters to sharpen, but that doesn't do me any good when I have a 2 foot dia maple to buck. I'm one to let the saw "ride the kerf" and I generally only use the dogs for felling, and the saw does not hesitate (bone stock) in 24" of wood.
So, since I'm too cheap to keep two sizes of bars and four chains on hand, I go with the bigger bar. Yes the saw would be lighter with a shorter bar for limbing, but it is not worth the extra money to me.
Another good reason for the longer bar is I'm of the opinion that when felling, it's always better if the bar is at leas as big as the tree. It's safer and easier, especially for those of us that don't fell everyday (or for the whole of the warm weather months, for that matter).
It really does depend a lot on the wood you cut. Yes a smaller bar is cheaper and the chain has fewer cutters to sharpen, but that doesn't do me any good when I have a 2 foot dia maple to buck. I'm one to let the saw "ride the kerf" and I generally only use the dogs for felling, and the saw does not hesitate (bone stock) in 24" of wood.
So, since I'm too cheap to keep two sizes of bars and four chains on hand, I go with the bigger bar. Yes the saw would be lighter with a shorter bar for limbing, but it is not worth the extra money to me.
Another good reason for the longer bar is I'm of the opinion that when felling, it's always better if the bar is at leas as big as the tree. It's safer and easier, especially for those of us that don't fell everyday (or for the whole of the warm weather months, for that matter).
SawTroll
Information Collector
Hi Niko!!!
660 with a 15"??? now that insane.....
You guys must have some keen fellers
Yes it is, and you can't buy it pho......
:rockn: :biggrinbounce2:
MCW
Somebody's talking crap here & it ain't the tree!
South Park cracks me up. Didn't have any fancy chainsaw or road sign photos so that'll have to do...
SawTroll
Information Collector
.....
Sadly though its possibly based on fact
All the 372's I've seen have had 24" bars.
Maybe because people lack imagination and own thoughts, and just buy what the dealers recommend - and the saws do look good with a 24" on......
.....something like the 13/14" bars almost everyone have on the smaller saws (about 50cc and less) here....
Btw, Welcome to the AS!
Last edited:
MCW
Somebody's talking crap here & it ain't the tree!
Maybe because people lack imagination and own thoughts, and just buy what the dealers recommend - and the saws do look good with a 24" on......
Btw, Welcome to the AS!
Actually all the 372's I've seen in the flesh have been on dealer's shelves with 24" bars and you're right, they look good
Good forum too, enjoying all the reading and info
matty f
ArboristSite Operative
found a 24" perfect for the 372 for felling and bucking got an 18" if i wanna get speedy when logging with it though!
Haywire Haywood
Fiscal Conservative Social Retard
Steve, have you ever run a 372 with a shorter bar and a bigger sprocket? Lots o fun.
Ian
Ian
SawTroll
Information Collector
superfire
Addicted to ArboristSite
bar--------------->
24" or go cryin to yur moma when your backi iz screamin in agonyyyyyyyy. les bending and les work when limin
24" or go cryin to yur moma when your backi iz screamin in agonyyyyyyyy. les bending and les work when limin
