timberwolf
Addicted to ArboristSite
I had hoped to do it as an 046BB, but my parts order has gone sideways somewhere between the time I spoke to the customer rep on the phone and the 47th parralel
Just a few pics on a 440 to 460 conversion. a number of minor spots that needed some grinding to get the jug to sit down into the 440 frame. The bolt holes also need a bit of slotting to take them about 1mm inward mostly in the front to back direction.
Carb is already done up, just a little port, piston and muffler work to do.
Just a few pics on a 440 to 460 conversion. a number of minor spots that needed some grinding to get the jug to sit down into the 440 frame. The bolt holes also need a bit of slotting to take them about 1mm inward mostly in the front to back direction.
Carb is already done up, just a little port, piston and muffler work to do.