Four Paws
Addicted to ArboristSite
Hey guys, I'm looking for a piston to retrofit into a project.
Hoping that anyone that has a 45mm piston around can measure it and post up the critical dimensions as follows. A picture would be fine as well.
Pin diameter =
Width of pin bosses =
Total height =
Compression Height (center line of pin to crown) =
Specific to my project, I am interested in finding a piston with a compression height of 20 mm or more, and a total height of at least 38mm.
I am specifically interested in Echo 600p piston dimensions. Regular Stihl 029 as well.
A piston from a PROMAC 54-55/ TITAN 55 /MAC 960 has promise, however I would like to know width between the pin bosses.
Thanks in advance.
Hoping that anyone that has a 45mm piston around can measure it and post up the critical dimensions as follows. A picture would be fine as well.
Pin diameter =
Width of pin bosses =
Total height =
Compression Height (center line of pin to crown) =
Specific to my project, I am interested in finding a piston with a compression height of 20 mm or more, and a total height of at least 38mm.
I am specifically interested in Echo 600p piston dimensions. Regular Stihl 029 as well.
A piston from a PROMAC 54-55/ TITAN 55 /MAC 960 has promise, however I would like to know width between the pin bosses.
Thanks in advance.