Want to Buy 670 Champ Cylinder

[Olesenofalaska]

Looking for the Cylinder for a Jonsered 670 Champ. I can get a piston, but the cylinder is no longer available through Jonsered.

 

[Big_Wood]

curious what your old cylinder looks like?

 

[firefighterwolf]

Looking for the Cylinder for a Jonsered 670 Champ. I can get a piston, but the cylinder is no longer available through Jonsered.

Is this one?

http://www.ebay.com/itm/OEM-Jonsere...524?pt=LH_DefaultDomain_0&hash=item20dc35b044

 

[Big_Wood]

it would be nice to get a pic of the intake but from what i can see from the top pic it looks more like a a 630 cylinder. 670 i'm pretty sure had a clamp on rubber intake boot while that cylinder looks like the bolt on intake block. i learned this in spike60's saw college

 

[Big_Wood]

i think that seller is actually on AS too. his name is bplust. not 100% sure on that though.

 

[firefighterwolf]

it would be nice to get a pic of the intake but from what i can see from the top pic it looks more like a a 630 cylinder. 670 i'm pretty sure had a clamp on rubber intake boot while that cylinder looks like the bolt on intake block. i learned this in spike60's saw college

That's what I was thinking...about the clamp on intake. It's been a long time since I have seen one though.

 

[retoocs555]

This one here I know is for 670: http://store.chainsawr.com/products...iston-and-cylinder-set-with-boot-type-intake0

The one on ebay is not a boot type jug, actually at 50mm bore, I am guessing somebody bolted a 266 Husky P+C onto a 630 and that is where the part and confusion on that item came from.

 

[Olesenofalaska]

Thank you for your help and for doing the legwork I should have done. It looks like Chainsawr has the right one.