910 e running kinda

[wedge]

the seals did the job but it runs 30 seconds and dies acts like its starving. any ideas?

 

[HiOctane]

At first look,seems a carb problem.Did you check screws adjustment,about one turn each out.Next,you could clean it and maybe you gonna need a carb kit.Check also if the fuel line is still in good condition.

 

[wedge]

the carb is clean as a whistle inside, im gonna fiddle with it more tommorow im thinking maybe its an adjustment thing

 

[Lawn Masters]

Perhaps the adjustments arent quite right, I dont know for sure. could be a fuel metering lever issue.

 

[Mange]

Set the setting H 1 full turn out, and L 1 full turn out, it will start on this.
If this does not help strart be the tank and move up as you elimenate stuff.

 

[Stumper]

As Mange said-Start at the tank. Almost half of the run and dfie saws I've seen were fixed with a new fuel filter

 

[wedge]

i found out why it dies, the spark plug boot is loose and it vibrates loose and makes it die. i squeezed it together slightly and it ran good for 15 minutes.