following... i was just thinking of getting a new saw in the 50cc-60cc range, the suspense of shopping and researching this week has been killing me to the point of dropping the coin on a 500p or either the 590 or 620p today actually, now a new model with those stats might be coming out? geez! 1st post btw but I've been tuned in for awhile though.
Hi thank you, I have a cs-400 already and need something bigger to replace my 038, actually after looking around today i bought the 590. For the price i can't go wrong, and i will be replacing the 400 with something in a couple more years possibly in the 50cc range. At the moment i needed something for the bigger logs i'll be facing here in a couple weeks. My cutting consist's of cutting for myself around 4 cords plus i help a couple friends and a family for their owb, about 12-16 cords, and a couple tree removals a year. Not everyday use but i do scrounge wood and cut limbs on the better stuff down to 2"Welcome to AS! I doubt that the 501sx (501p) would be released here anytime soon as there are still 500p's still on shelves. What would you be looking to do with your new saw?
Hi thank you, I have a cs-400 already and need something bigger to replace my 038, actually after looking around today i bought the 590. For the price i can't go wrong, and i will be replacing the 400 with something in a couple more years possibly in the 50cc range. At the moment i needed something for the bigger logs i'll be facing here in a couple weeks. My cutting consist's of cutting for myself around 4 cords plus i help a couple friends and a family for their owb, about 12-16 cords, and a couple tree removals a year. Not everyday use but i do scrounge wood and cut limbs on the better stuff down to 2"
Yes the 590 is exactly that, a value! I already pulled the caps before i stuck it in wood. So far i'm really impressed as i had the bar burried in a 28-30" oak last night at a -5 temp. I have plenty of time left in my 400 but this new model has me intrigued, i see in my future replacing it in place of my 400 and possibly modding my 590 to seperate itself from the 501 if that's the route i go with. my 70cc saw idea is modding my 038 with a bigger cylinder and somebody's porting to it and calling it a super magnum, but these echo saws keep impressing me for their quality and value, which doesn't make decisions easy when buying a saw.For your use the cs400/590 makes an excellent 2 saw plan! That 590 is an excellent value. Lots of guys like a 40 cc saw and 60cc saw for a 2 saw firewood plan. Speaking from experience the 50cc saw class is kind of an odd duck in your case. You have the 590 for all the big stuff and the 400 for limbing and light work. If you absolutely had to have a 50cc saw for your small saw you may end up either disliking the 590 or what ever 50cc saw you got because there isn't a huge difference between the classes in this range of saws. Now if you had a 70cc saw that might be a different story. If you haven't already check out this thread:
http://www.arboristsite.com/community/threads/15-echo-cs620pw-information.278407/
Lots of echo love in there. I'm sure you are going to love that 590. First thing I would do with it is pull the limit caps on the carb and adjust it a bit richer.
We have much warmer weather here as well as usually have a good foot of ice by now as well, keep us posted if you get 1I found a place where i can buy 501sx but without garanty , it's not what it stop me , i am out of job for 8 week now and dont know when it will begin . Not good weather here normaly we have -30 all day in january and 2 or 3 foot of ice on the lake .... today it rain all the day and no ice on lake and river and few days ago we have green lawn... never have see this
It's a CS 501 P here , and hasn't been released in the US yet but should be soon .
If you go to a CDN dealer and they don't know anything about it tell them to call the CDN head office .
List is $630 Cdn
Enter your email address to join: