klaus von herten
ArboristSite Member
I have a late 1990s Wild Thing (2175) that is a bit leaky but otherwise runs like a champ. It’s been 5 years from the last carb rebuild and it hasn’t had much use, maybe a cord of wood in that time.
I think I used only canned premixed fuel and emptied it but the fuel line finally disintegrated.
Changed all the fuel lines but I noticed when taking it apart that it had no nuts holding down the air filter (or I lost them at some point). Hopefully the carburetor doesn’t need any attention right now.
Anyhow, does anyone know the thread and diameter for replacement nuts and if a washer is used?
Below is the threaded shaft that the nuts fasten onto.
Thank you AS sages in advance!
I think I used only canned premixed fuel and emptied it but the fuel line finally disintegrated.
Changed all the fuel lines but I noticed when taking it apart that it had no nuts holding down the air filter (or I lost them at some point). Hopefully the carburetor doesn’t need any attention right now.
Anyhow, does anyone know the thread and diameter for replacement nuts and if a washer is used?
Below is the threaded shaft that the nuts fasten onto.
Thank you AS sages in advance!