kcurbanloggers
ArboristSite Operative
Hey all,
I'm at a loss here. I have an 07 bandit 250xp with a cat 3054 in it that has a starting problem. When I turn the key, i get power to the gauges, but when I attempt to start it I get no response from the starter. The only way to start it is to hook jumper cables to the starter and arc the terminals. I replaced the stater and solenoid as well as the ignition. I have been searching for faults but no luck yet. Any help or ideas should be greatly appreciated.
Thanks in advance,
A
Sent from my Pixel 4a using Tapatalk
I'm at a loss here. I have an 07 bandit 250xp with a cat 3054 in it that has a starting problem. When I turn the key, i get power to the gauges, but when I attempt to start it I get no response from the starter. The only way to start it is to hook jumper cables to the starter and arc the terminals. I replaced the stater and solenoid as well as the ignition. I have been searching for faults but no luck yet. Any help or ideas should be greatly appreciated.
Thanks in advance,
A
Sent from my Pixel 4a using Tapatalk
