Bb395

[SawTroll]

The saw would have been even wider.......

When I look at the bottom of the cylinder, I can imagine that - I guess you are right! :msp_smile:

 

[benjy]

looking good so far will..... cant wait for the vids... what u doing to the muffler?

 

[Mastermind]

I thought the compression would be real high by looking at the size of that chamber. I'm anxious to know where it ends up.....

Thanks for this thread.......I like me some 395XPs.

 

[WidowMaker1]

one of me favourite saws the 395, opcorn:

 

[parrisw]

looking good so far will..... cant wait for the vids... what u doing to the muffler?

Probably a couple pipes.

 

[parrisw]

I thought the compression would be real high by looking at the size of that chamber. I'm anxious to know where it ends up.....

Thanks for this thread.......I like me some 395XPs.

Ya? I only took .035 out, then machined the chamber a little bigger.

 

[Roll Tide]

one of me favourite saws the 395, opcorn:

Have I ever mentioned how much I like mine

 

[Dan_in_WI]

Have I ever mentioned how much I like mine

I'm pretty sure you've never once mentioned anything of the sort.:msp_razz:

 

[Roll Tide]

I'm pretty sure you've never once mentioned anything of the sort.:msp_razz:

Oh, well I really love my 395 I'd marry it if I could LOL.

 

[RiverRat2]

Ok, you guys are confusing me now. Who's saw are we talking about now? If your talking about my pic, I took out .035".

What looks like detonation? Am I missing something here?

You are way too easy Will,,, Chill out,,,

Yup they sound like no other!!!! Love em!! This one will be a 100cc 395.

Sweet!!!! and yeah that's true,,, them big huskies do have some balls

 

[Mastermind]

Ya? I only took .035 out, then machined the chamber a little bigger.

I take .020 on the 395 and end up with 220psi. :msp_ohmy:

 

[parrisw]

I take .020 on the 395 and end up with 220psi. :msp_ohmy:

Oops, I didn't know that, still in the figurin stages of knowing how much to take out of each saw.

 

[blsnelling]

Dish out your piston if need be. I don't understand the why, but they say that adds torque, IIRC.

 

[benjy]

Oops, I didn't know that, still in the figurin stages of knowing how much to take out of each saw.

hmmm first time for a saw with 2 de-comp valves hahaha???:msp_tongue:

 

[Mastermind]

Dish out your piston if need be. I don't understand the why, but they say that adds torque, IIRC.

The dished piston exposes more area to expanding gasses......

 

[4492011]

I take .020 on the 395 and end up with 220psi. :msp_ohmy:

This is a BB 395 kit could have a totally different combustion chamber than oem

 

[Mastermind]

This is a BB 395 kit could have a totally different combustion chamber than oem

That my friend is a fact. It looks smaller to me.

 

[old 040]

The dished piston exposes more area to expanding gasses......

expanding gasses, must be too much bacon today!:hmm3grin2orange:

 

[parrisw]

Hopefully it'll be running this weekend. Then we'll see how the comp is.

 

[Mastermind]

Hopefully it'll be running this weekend. Then we'll see how the comp is.

I'm sure it'll be fine Will.

Just to give you an idea how much a little does......we put a .020 base gasket in David's 395 and compression dropped 50psi.