I've got to replace the bar on my Dolmar PS-510. Saw is about 5 years old, and I've over worked it mightily in that time. It came with an 18" bar, and I really like the balance with that bar. The original bar is 3/8" pitch, .o50 gauge, and 64 drive links. I've tried to find a replacement on all the vendors and sponsors sites here. Most carry only .325 pitch bars, or none at all. I have enough chain loops that I really don't want to change now, and I'm happy with the way the 510 pulls the 3/8" chain. I even went onto the Dolmar site and found the right bar, but it is listed as out of stock. My dealer doesn't have any in stock, and is also having trouble getting one, though he hasn't given up.
For now, I can keep running my old one, and dressing it as it needs. I will taper off use as the weather warms, and only deal with storm damage for the summer months. So, without violating the preference for advertising and sponsoring vendors which don't have this bar, anyone have another recommendation.
Thanks
For now, I can keep running my old one, and dressing it as it needs. I will taper off use as the weather warms, and only deal with storm damage for the summer months. So, without violating the preference for advertising and sponsoring vendors which don't have this bar, anyone have another recommendation.
Thanks