Chainsaw Dyno bring saws to there knees. Build from start to end with video

[chadihman]

Just noticed the plate on the scale should have a pivot joint, to prevent binding when the arm from the hydraulic motor rotates. It will not be much but it could throw off the readings quite a bit. The arm will tend to tip the plate with a solid joint causing uneven loading.

This thing is GREAT! Have you run it?

Yes It does have a pivot point so the plate always sits level on the scale. It has a bolt that has two nuts jammed together keeping the bolt from clamping it.

 

[chadihman]

I'd be interested in letting this dyno go.

 

[blsnelling]

You're alive! Hello Chad.

 

[anymanusa]

Soo are there any other dyno results besides the 1?

 

[chadihman]

Soo are there any other dyno results besides the 1?

Ohhh yes theres a bunch of free dyno results and graphs on here somewhere.

 

[blsnelling]

Soo are there any other dyno results besides the 1?

http://www.arboristsite.com/community/search/13307420/

 

[grizz55chev]

http://www.arboristsite.com/community/search/13307420/

This comes up as not available.

 

[anymanusa]

http://www.arboristsite.com/community/search/13307420/

Why does that pull up an error?

 

[blsnelling]

It should pull up all of Chad's threads. Go to his Profile and then Postings. Go to the bottom of that page.

 

[chadihman]

You're alive! Hello Chad.

Hi Brad

 

[pioneerguy600]

I remember seeing a graph in this older thread, one of Brads saws IIRC,

http://www.arboristsite.com/community/threads/snellerized-ms461-on-the-dyno.272016/

 

[Guru LLC]

I'm still alive too.

Sorta...

 

[pioneerguy600]

I'm still alive too.

Sorta...

Did you have any saws run up on the dyno? Can`t remember all the posts in muh small lil brain, just had that one bookmarked from years back.

 

[Guru LLC]

http://www.arboristsite.com/communi...-stock-261cm-gotta-see-this-one.259228/page-5

 

[pioneerguy600]

http://www.arboristsite.com/communi...-stock-261cm-gotta-see-this-one.259228/page-5

Thanks R.

 

[Guru LLC]

Sure don't see many familiar folks here these days Jerry. Everything changes I reckon.

 

[pioneerguy600]

Lose some and gain some, very few of the members still here from when I joined up ten years ago.

 

[Guru LLC]

I first joined in 2009. I thought this was the greatest forum on the web.

 

[fwgsaw]

I first joined in 2009. I thought this was the greatest forum on the web.

It still has it moments. Still plenty of good people on here just a lot more PM's going on then threads sometimes. But lots have left some have passed and so goes life. For me I will stay here and look forward to watching the good and the bad come and go.

 

[Walter Glover]

So whatever became of Chad?
Anyone pick up where he left off?